PRODUCT DESCRIPTION
This two-component product is mainly prepared by epoxy resin, coal-tar, aluminum powder and polyamide as curing agent. This product features:
● High hardness
● Great adhesion
● Great physical resistance to abrasion, impact
● Great resistance to sea water, moisture, sewage, mineral oil, rust
Typical Uses:
This heavy anticorrosion primer provides an anticorrosive protection layer in a wide range of industrial situations as:
● Gas & oil storage tank
● Underwater pipeline
● Offshore drilling rigs
● Penstocks
● Liner for clarifiers
● Dam gates
● Crude oil & gasoline tank
● Underground pipeline
PRODUCT SELLING POINT
● High hardness and Great adhesion
● Great physical resistance to abrasion, impact
● Great resistance to sea water, moisture, sewage, mineral oil, rust
● Resistance to 30% hydrochloric acid for 1200h.
●Factory direct sale.
Mixing | Mix part A and part B as 22:22 by weight. Slowly add part B into part A and ensure mixed completely. |
Thinner | X-7 Epoxy paint thinner ≤ 10 % w./w. |
Cleaner | X-7 Epoxy paint thinner |
Application methods | Airless spray (recommended):Nozzle tip: 0.017-0.025 inch, minimum 3000 psi. Brush: recommended for small areas only. Roller: recommended for small areas only. |
Cautions | Apply in good weather. The substrate temperature shall be in the range of 0- 40oC, and at least 3oC over dew point to avoid condensation. Also, ensure apply at humidity below 85%. |
Substrate Temperature | 10 ℃ | 25 ℃ | 38℃ |
To touch/h | 14 | 8-10 | 2 |
To handle/h | 48 | 18 | 5 |
To cure/h | 7 | 3-4 | 2 |
* Data tested under controlled temperature and relative humidity below 85%
Color | Black |
Density | ~ 1.41kg/l |
Flash point | Part A: 39 Part B: 27 |
Hardener | Epoxy curing paint |
Solid Volume | 74 ±2% |
Adhesion | ≥ 6MPA |
Impact resistance | ≥40 |
Flexibility | ≤8mm |
Pot life | ≥h |
Theoretical spreading rate | 0.18kg/m2 |
———————————————————————————————————————————————————————————————————————————————————————————————————————————————————————
———————————————————————————————————————————————————————————————————————————————————————————————————————————————————————
Copyright © 2020 Changzhou IMS New Materials Technology Co., Ltd. | All Rights Reserved | XML
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.