Best Price E06-500 Inorganic Heat-resistant Primer Which Can...

这里可以自定义设置

PRODUCT DESCRIPTION

This two-component product is mainly composed of partially hydrolyzed alkyl silicate solution, superfine metal powder, pigments, additives and solvents, etc.This product has excellent heat resistant ability and can stand sudden temperature change. What’s more, it also features with strongly adhesive, drying fast and its film won’t be affected by the cutting and welding situation of base material, it is convenient in construction.

Typical Uses:

This product is exclusively used as compatible primer of heat-resistant and anti-corrosive coating below 500℃.

这里可以自定义设置

Application Guide

● Mixing:

Use the power mixer to mix the main paint evenly, and then as you stir it, you add the hardener until you to mix the paint well. The mixture was cured for 30 minutes no less than 10 ℃, while 15minutes over 10 ℃.

● Thinner:

Exclusive thinner for Inorganic Heat-resistant Paint

● Airless Spray:

Nozzle tip: 0.025~0.031 inches

Spray pressure: 18~28 MPa.

Thinner ratio: 5~15% (by weight of paint).

● Brush, Roller:

Recommended.

Must achieve required thickness.

DRYING SCHEDULE

Substrate temperature	10 °C	20 °C	30 °C
To touch (30um)	1h	0.5h	0.2h
To handle (30um)	24h	12h	6h
Min. recoating time	8h	4h	3h
Max. recoating time	-	-	-
Pot life	4h	2h	1h
* Make sure no chalking and other contaminations before recoating.
* Above data for reference only, actual drying time and recoating time is dependent on temperature, dry film thickness, ventilation condition, humidity, mechanical strength,etc.

这里可以自定义设置

SURFACE TREATMENT

All surface to be coated shall be clean and dry. The surface shall be evaluated and treated according to ISO8504 standard.

Steel: Sanding to Sa2.5 (ISO8501-1:2007). It is acceptable to polish by power tools to meet at least St2.0(ISO8501-1:2007).

Steel with shop primer: clean, dry, sound and approved shop primer.

Painted surfaces: only on clean, dry and sound compatible primers.

APPLICATION

Application conditions: Substrate temperature shall be at 3 ℃ higher than dew point, relative humidity less than 85%. Measurement of temperature and humidity should be close to substrate.

这里可以自定义设置

CLASSICAL COATING SYSTEM

Please inquiry JIANBANG Paint for specific coating solutions.

Organic silicone heat-resistant primer (800℃）

2*40µm (dry film thickness)

Organic silicone haet-resistant topcoat （800℃）

2*30µm (dry film thickness)

这里可以自定义设置

SAFETY AND HEALTH

Please refer to MSDS before using this product. If you do not fully understand the restrictions, or cannot follow MSDS directions strictly, do not use this product. This volatile product is flammable. Keep this product away from flame or fire. Smoking is strictly prohibited in working area. Keep working area ventilated during application to make sure solvent vapor content is low in the air. PPE is necessary to avoid this product contacting with eyes or skin. More detailed safety tips are based on practical situation.

Please handle used paint barrel correctly to avoid any pollution.

Storage:

Store this product in shady, dry, and ventilated warehouse away from fire and heat. The shelf life is 12 months at room temperature.

Disclaimer:

All technical data given in this document is based on our knowledge achieved in lab and practice, it is not completely correct. Although we try to keep the validity of our advice, however we cannot predict the practical conditions that will affect paint quality. Herein, we cannot be responsible for the consequences of variations in such conditions, or for unforeseen conditions. We reserve the right to modify this document without informing in advance.