Best price silicone resin high-temperature resistance anti-corrosive paint
PRODUCT DESCRIPTION
This product is composed of silicone resin, pigments with resistance to heat and corrosion, fillers, curing agent, additives and so on. With great thermos-stability, this paint can withstand dramatic temperature difference and can sustain even up to 800℃. Besides, it has many other advantages such as great resistance to water, corrosion, chemical atmosphere, electricity and so on. Furthermore, this paint is fast drying and easy to apply.
Typical Uses:
This product is typically designed to coat high temperature parts of various industries such as metallurgy, oil industry and aviation industry.
Application Guide
● Mixing:
Use the power mixer to mix the main paint evenly, and then as you stir it, you add the hardener until you to mix the paint well.
● Thinner:
Exclusive thinner for heat-resistant paint
● Airless Spray:
Nozzle tip: 0.017~0.023 inch.
Spray pressure: 15~18 MPa.
Thinner ratio: 0~15% (by weight of paint).
● Brush, Roller:
Recommended.
Must achieve required thickness.
DRYING SCHEDULE
Substrate temperature | 10 °C | 20 °C | 30 °C |
To touch (30um) | 2h | 1h | 30min |
To handle (30um) | 8h | 4h | 3h |
Min. recoating time | 8h | 4h | 3h |
| Max. recoating time | - | - | - |
Pot life | 4h | 2h | 1h |
* Make sure no chalking and other contaminations before recoating. | |||
* Above data for reference only, actual drying time and recoating time is dependent on temperature, dry film thickness, ventilation condition, humidity, mechanical strength,etc. | |||
SURFACE TREATMENT
All surface to be coated shall be clean and dry. The surface shall be evaluated and treated according to ISO8504 standard.
Steel: Sanding to Sa2.5 (ISO8501-1:2007). It is acceptable to polish by power tools to meet at least St2.0(ISO8501-1:2007).
Steel with shop primer: clean, dry, sound and approved shop primer.
Painted surfaces: only on clean, dry and sound compatible primers.
APPLICATION
Application conditions: Substrate temperature shall be at 3 ℃ higher than dew point, relative humidity less than 85%. Measurement of temperature and humidity should be close to substrate.
CLASSICAL COATING SYSTEM
Please inquiry JIANBANG Paint for specific coating solutions.
Organic silicone heat-resistant primer (800℃）
2*40µm (dry film thickness)
Organic silicone haet-resistant topcoat （800℃）
2*30µm (dry film thickness)
SAFETY AND HEALTH
Please refer to MSDS before using this product. If you do not fully understand the restrictions, or cannot follow MSDS directions strictly, do not use this product. This volatile product is flammable. Keep this product away from flame or fire. Smoking is strictly prohibited in working area. Keep working area ventilated during application to make sure solvent vapor content is low in the air. PPE is necessary to avoid this product contacting with eyes or skin. More detailed safety tips are based on practical situation.
Please handle used paint barrel correctly to avoid any pollution.
Storage:
Store this product in shady, dry, and ventilated warehouse away from fire and heat. The shelf life is 12 months at room temperature.
Disclaimer:
All technical data given in this document is based on our knowledge achieved in lab and practice, it is not completely correct. Although we try to keep the validity of our advice, however we cannot predict the practical conditions that will affect paint quality. Herein, we cannot be responsible for the consequences of variations in such conditions, or for unforeseen conditions. We reserve the right to modify this document without informing in advance.
Packaging | Packing size | Packing weight |
| Part A(iron barrel) | 20L | 20KG |
Part B(plastic barrel) | 4L | 2KG |
Certificate