Industrial Functional Epoxy Floor Paint At Wholesale Factory Price
PRODUCT DESCRIPTION
Typical Uses:
PRODUCT SELLING POINT
● The YMS epoxy floor paint suppliers products are mainly prepared by epoxy resin, curing agent, dispersant and aggregates depend on requirements.
● Main advantages of this floor paint are great resistance of slippery, electrostatic, acid and alkali.
● Moreover, it also has good resistance to organic solvent, heavy load and abrasion.
● Besides, it combines incredible hardness and bonding power to provide a heavy duty and to be used as topcoat.
PRODUCT ADVANTAGES
PRODUCT PARAMETER
Mixingv | Use the power mixer to mix the main paint evenly, and then as you stir it, you add the hardener until you get to mix well. Generally, if the temperature is below 10 ℃, it needs 20 min induction time; If the temperature is over 10 ℃, it needs 15 min induction time. |
Mixing ratio | Part A: Part B= 20:5(by weight) |
Thinner | Exclusive thinner |
Airless spray | Nozzle tip: 0.017~0.023 inches |
Brush、Roller | Spray pressure: 15~18 MPa |
MORE SPECIFIC COLORS PLEASE CONSULT US
DRYING SCHEDULE
Substrate Temperature | 10 ℃ | 20 ℃ | 30 ℃ |
To touch | 8h | 4h | 3h |
To handle | 48h | 24h | 24h |
Min. recoating time | 8h | 4h | 3h |
Max. recoating time | - | - | - |
Pot life | 1.5h | 1h | 0.5h |
* Make sure no chalking and other contaminations before recoating
* Above data for reference only, actual drying time and recoating time is dependent on temperature, dry film thickness, ventilation conditions
PRODUCT SPECIFICATIONS
Color | Customized |
Gloss | Glossy |
Density | ~1.3 Kg/L(after mixing) |
Hardness | Epoxy paint curing agent |
Solid volume | (50±2) % |
Film thickness | 100µm dry film thickness (about 200µm wet film thickness) |
Theoretical spreading rate | 3.8m²/Kg (100µm dry film thickness) |
Full Cure (23±2℃) | (23±2℃) 7~15d |
Flash Point | 31℃ |
PRODUCT APPLICATION
Substrate temperature shall be at 3 ℃ higher than dew point, relative humidity less than 85%. Measurement of temperature and humidity should be close to substrate.
TEST REPORT
Certificate
CUSTOMER EVALUATION
SHOW CASE
- 01
Dong Ying Olympics Sports Center
Products: Epoxy Sealing Agent + Epoxy Slurry Intermediate Layer+ Epoxy Self-leveling Floor Finish
———————————————————————————————————————————————————————————————————————————————————————————————————————————————————————
- 02
PT.Conch North Sulawesi Cement
Products: Epoxy Sealing Agent + Epoxy Slurry Intermediate Layer+ Epoxy Self-leveling Floor Finish
———————————————————————————————————————————————————————————————————————————————————————————————————————————————————————
03
PT Sgmw Motors Indonesia-lingyun Workshop
Product: Self-leveling Epoxy Floor Paint