YMS PAINT Over 20 years experience in the production of customized industrial paint coatings

Fast drying alkyd Iron Red Anti-rust Paint for Metal Protection 1

Fast drying alkyd Iron Red Anti-rust Paint for Metal Protection 2

Fast drying alkyd Iron Red Anti-rust Paint for Metal Protection 3

Fast drying alkyd Iron Red Anti-rust Paint for Metal Protection 4

Fast drying alkyd Iron Red Anti-rust Paint for Metal Protection

Resistance To Impact:

corrosion

Film Thickness:

80um(for dry film thickness)180um(for wet film thickness)

Theoretical Spreading Rate:

4.88㎡/KG

Flash Point:

31℃

Color:

Iron red

Usage:

Matt;Flat

Density:

1.5KG/L

Solid Volume:

(44±2 )%

Inquiry

Write a Review

PRODUCT DESCRIPTION

Fast drying alkyd Iron Red Anti-rust Paint for Metal Protection 5

It is composed of quick drying alkyd resin, iron oxide red, anti rust pigment and filler, drier, auxiliary agent, organic solvent, etc.It has good anti-rust performance, strong adhesion, fast drying, good hardness, thick primary film, good construction performance, and can be matched with alkyd, phenolic and other top coats.

Typical Uses:

It is suitable for atmospheric corrosion, metallurgical industry, ships and other ferrous metal priming, water spray line to be used for quick dry coating.

Fast drying alkyd Iron Red Anti-rust Paint for Metal Protection 6

Fast drying alkyd Iron Red Anti-rust Paint for Metal Protection 7

Application Guide

Fast drying alkyd Iron Red Anti-rust Paint for Metal Protection 8

● Mixing:

Ready to use.

● Thinner:

Exclusive Alkyd Paint Thinner

● Airless spray:

Nozzle tip: 0.017~0.023 inches

Spray pressure: 15~18Mpa

Thinner rate: 5~15%

● Brush, Roller:

Recommended for small areas only.

Must achieve required thickness.

DRYING SCHEDULE

Fast drying alkyd Iron Red Anti-rust Paint for Metal Protection 9

Substrate temperature	10°C	20 °C	30°C
To touch(30um)	4h	1h	0.5h
To handle(30um)	48h	24h	12h
Min. recoating time	36h	24h	12h
Max. recoating time	-	-	-
* Make sure no chalking and other contaminations before recoating.
* Above data for reference only, actual drying time and recoating time is dependent on temperature, dry film thickness, ventilation condition.

Fast drying alkyd Iron Red Anti-rust Paint for Metal Protection 10

SURFACE TREATMENT

Fast drying alkyd Iron Red Anti-rust Paint for Metal Protection 11

All surfaces to be coated shall be clean and dry. The surface shall be evaluated and treated according to ISO8504 standard.
Coated surface: applied on clean, dry and undamaged primer only.

APPLICATION

Fast drying alkyd Iron Red Anti-rust Paint for Metal Protection 12

Application conditions: Substrate temperature shall be at 3 ℃higher than dew point, relative humidity less than 85%. Measurement of temperature and humidity should be close to substrate.

Fast drying alkyd Iron Red Anti-rust Paint for Metal Protection 13

Fast drying alkyd Iron Red Anti-rust Paint for Metal Protection 14

Fast drying alkyd Iron Red Anti-rust Paint for Metal Protection 15

CLASSICAL COATING SYSTEM

Fast drying alkyd Iron Red Anti-rust Paint for Metal Protection 16

Please inquiry JIANBANG Paint for specific coating solutions.

Fast drying alkyd Iron Red Anti-rust Paint for Metal Protection 17

Alkyd Iron Oxide Red Anti-rust Paint : 2*40µm (dry film thickness)

Please inquiry JIANBANG Paint for specific coating solutions.

Alkyd Enamel : 2*35µm (dry film thickness)

SAFETY AND HEALTH

Fast drying alkyd Iron Red Anti-rust Paint for Metal Protection 18

Please refer to MSDS before using this product. If you do not fully understand the restrictions, or cannot follow MSDS directions strictly, do not use this product. This volatile product is flammable. Keep this product away from flame or fire. Smoking is strictly prohibited in working area. Keep working area ventilated during application to make sure solvent vapor content is low in the air. PPE is necessary to avoid this product contacting with eyes or skin. More detailed safety tips are based on practical situation.
Please handle used paint barrel correctly to avoid any pollution.

Storage:

Store this product in shady, dry, and ventilated warehouse. Storage temperature above 0℃, the shelf life is 12 months at room temperature. If exceeding shelf life, the products shall be tested before using.

Disclaimer:

All technical data given in this document is based on our knowledge achieved in lab and practice, it is not completely correct. Although we try to keep the validity of our advice, however we cannot predict the practical conditions that will affect paint quality. Herein, we cannot be responsible for the consequences of variations in such conditions, or for unforeseen conditions. We reserve the right to modify this document without informing in advance.

Fast drying alkyd Iron Red Anti-rust Paint for Metal Protection 19

Packing size	Packing weight
20L	25KG

Certificate

Fast drying alkyd Iron Red Anti-rust Paint for Metal Protection 20

Fast drying alkyd Iron Red Anti-rust Paint for Metal Protection 21

CE Certificate

Fast drying alkyd Iron Red Anti-rust Paint for Metal Protection 22

Environmental Management Syatem ISO14001 New

Fast drying alkyd Iron Red Anti-rust Paint for Metal Protection 23

Occupational Health And Safety Management System OHSAS 18001 New

Fast drying alkyd Iron Red Anti-rust Paint for Metal Protection 24

Quality Management System ISO 9001 New

Fast drying alkyd Iron Red Anti-rust Paint for Metal Protection 25

ROHS Report

Fast drying alkyd Iron Red Anti-rust Paint for Metal Protection 26

SASO1

Fast drying alkyd Iron Red Anti-rust Paint for Metal Protection 27

sgs1

Fast drying alkyd Iron Red Anti-rust Paint for Metal Protection 28

sgs2

Fast drying alkyd Iron Red Anti-rust Paint for Metal Protection 29

SRC

Get in touch with us

YMS Industrial paint suppliers core products, including anti corrosive paint, antirust paint, acid & alkali resisting paint, heat resisting paint, building & floor paint etc., help protect and extend substrate life for years.