loading

YMS paint manufacturers started in 2001, specialized in the production of customized  coatings. | YMS Paint the professional Industrial Paint Suppliers, Anti Corrosive Paint Manufacturer.

这里可以自定义设置
High Performance Chlorinated Rubber Anti-rust Paint for Steel Structure
B站不支持收货地址
B站不支持库存规格
Color:
customized
Usage
semi-gloss
Density:
1.4KG/L
Solid Volume:
(42±2 )%
Resistance To Impact:
corrosion
Theoretical Spreading Rate:
3㎡/KG
Film Thickness:
100um(for dry film thickness)238um(for wet film thickness)
Flash Point:
31℃
To Touch, Minutes@23±2 °C:
2h
To Handle, Hours@23±2 °C:
24h
参数暂无数据
多属性暂无数据
B站不支持优惠卷

Add success, do you want to check your shopping cart?

暂无分享
B站不支持产品保障
该产品后台详情无内容
这里可以自定义设置

PRODUCT DESCRIPTION

This rust-resistant paint, based on chlorinated rubber resin, has excellent performance in adhesion to steel, corrosion-resistance, and low-temperature construction property. Moreover, its film is free from saponification.

 

Typical Uses:

This product can be applied as rust-resistant primer for ship bottom, steel structure below waterline in various environment.

这里可以自定义设置
这里可以自定义设置

Application Guide

● Mixing: 

Use the power mixer to mix the main paint evenly.

● Mixing Ratio:

Ready to use

● Thinner:

Chlorinated rubber paint thinner.

● Airless Spray:

Nozzle tip: 0.018~0.025 inches.

Spray pressure: 18~25 MPa.

Thinner ratio: 5~15% (by weight of paint).

● Brush, Roller:

Recommended for small areas only.

Must achieve required thickness.

DRYING SCHEDULE 

Substrate temperature

10 °C

20 °C

30 °C

To touch (40μm)

3h

2h

1h

To handle (40μm)

48h

24h

12h

Min. recoating time12h6h3h

* Make sure no chalking and other contaminations before recoating.

* Above data for reference only, actual drying time and recoating time is dependent on temperature, dry film thickness, ventilation condition.

这里可以自定义设置

SURFACE TREATMENT

 

All surfaces to be coated shall be clean and dry. The surface shall be evaluated and treated according to ISO8504 standard.
Bare steel: sandblasting to Sa2.5(IOS8501-1:2007). For the non-soaking site, acceptable for power tool grinding, at least reach St2(IOS8501-1:2007).
Painted surface: only apply to clean, dry and intact compatible primer.

APPLICATION 

Application conditions: Substrate temperature shall be at 3℃ higher than dew point, relative humidity less than 85%. Measurement of temperature and humidity should be close to substrate.

这里可以自定义设置

CLASSICAL COATING SYSTEM

Please inquiry JIANBANG Paint for specific coating solutions.

Chlorinated Rubber Anti-rust Primer : 2*50µm (dry film thickness)

Ant写点什么 ...

High-build Chlorinated Rubber Anti-rust Paint
 :
 2*80µm (dry film thickness)

Acrylic Finish : 2*30µm (dry film thickness)

这里可以自定义设置

SAFETY AND HEALTH

Please refer to MSDS before using this product. If you do not fully understand the restrictions, or cannot follow MSDS directions strictly, do not use this product. This volatile product is flammable. Keep this product away from flame or fire. Smoking is strictly prohibited in working area. Keep working area ventilated during application to make sure solvent vapor content is low in the air. PPE is necessary to avoid this product contacting with eyes or skin. More detailed safety tips are based on practical situation.

Please handle used paint barrel correctly to avoid any pollution.

 

Storage:

Store this product in shady, dry, ventilated and away from heat sources warehouse. Storage temperature above 0℃, the shelf life is 12 months at room temperature.  If exceeding shelf life, the products shall be tested before using.

 

Disclaimer:

All technical data given in this document is based on our knowledge achieved in lab and practice, it is not completely correct. Although we try to keep the validity of our advice, however we cannot predict the practical conditions that will affect paint quality. Herein, we cannot be responsible for the consequences of variations in such conditions, or for unforeseen conditions. We reserve the right to modify this document without informing in advance.

Packaging

Packing size

Packing weight

Part A

20L

22/25 KG

Certificate

  • CE Certificate
    CE Certificate
  • Environmental Management Syatem ISO14001 New
    Environmental Management Syatem ISO14001 New
  • Occupational Health And Safety Management System OHSAS 18001 New
    Occupational Health And Safety Management System OHSAS 18001 New
  • Quality Management System ISO 9001 New
    Quality Management System ISO 9001 New
  • ROHS Report
    ROHS Report
  • SASO1
    SASO1
  • sgs1
    sgs1
  • sgs2
    sgs2
  • SRC
    SRC

PRODUCT MESSAGE

社媒暂无评论

RELATED PRODUCTS

Chat Online 编辑模式下无法使用
Leave Your Message inputting...
We will get back to you asap