loading

YMS paint manufacturers started in 2001, specialized in the production of customized  coatings. | YMS Paint the professional Industrial Paint Suppliers, Anti Corrosive Paint Manufacturer.

METAL PAINT

Oriented by technology, we serve customers worldwide not only our high quality products, but also technical consultation and engineering scenarios.

Home  > PRODUCTS  > Metal Protection Paint  > 

High quality Water-based Epoxy Anti-corrosive Paint for the concrete, steel structures and tanks

这里可以自定义设置
High quality Water-based Epoxy Anti-corrosive Paint for the concrete, steel structures and tanks
B站不支持收货地址
B站不支持库存规格
Color:
Customized
Usage
Flat, High gloss, Matte
Density:
~1.25 Kg/L
Solid Volume:
(40±2) %
Adhesion Strength:
1 level
Theoretical Spreading Rate:
5.33 m²/Kg (60µm dry film thickness)
Film Thickness:
60µm dry film thickness (about 150µm wet film thickness)
Shelf Life:
12 months
To Touch, Minutes@23±2 °C:
4 h
To Handle, Hours@23±2 °C:
24 h
Pot Life, Hours@23±2℃ :
2 h
参数暂无数据
多属性暂无数据
B站不支持优惠卷

Add success, do you want to check your shopping cart?

暂无分享
B站不支持产品保障
该产品后台详情无内容
这里可以自定义设置

PRODUCT DESCRIPTION

This product is the two-component water-based paint which is composed of high-performance water-soluble modified epoxy resin, imported water-based amine curing agent, titanium dioxide, corrosion-resistant agents etc.

 

Typical Uses:

 This product is anti-corrosion paint which is designed for petrochemical pipelines, pipe racks and tanks. Meanwhile, it can be used for machinery and equipment, bridges, steel structures etc. Besides, this paint is also suitable for containers, gasholder and concrete.

这里可以自定义设置
这里可以自定义设置

Application Guide

● Mixing: 

Use the power mixer to mix the main paint evenly, and then add the hardener and stir until it is well mixed.

● Mixing Ratio:

Part A: Part B=20:5 (by weight)

● Thinner:

Clean water

● Airless Spray:

Nozzle tip: 0.017~0.023 inches.

Spray pressure: 15~18 MPa.

Thinner ratio: 0~10% (by weight of paint).

● Brush, Roller:

Recommended

Must achieve required thickness

DRYING SCHEDULE 

Substrate temperature

10 °C

20 °C

30 °C

To touch (30μm)

6h

4h

3h

To handle (30μm)

24h

24h

20h

Min. recoating time24h24h20h
Max. recoating time---
Pot life4h2h1h

* Make sure no chalking and other contaminations before recoating.

* Above data for reference only, actual drying time and recoating time is dependent on temperature, dry film thickness, ventilation condition.

这里可以自定义设置

SURFACE TREATMENT

 

All surfaces to be coated shall be clean and dry. The surface shall be evaluated and treated according to ISO8504 standard.

Coated surface: applied on clean, dry and undamaged primer only.

APPLICATION 

Application conditions: Substrate temperature shall be at 3℃ higher than dew point. Measurement of temperature and humidity should be close to substrate.

这里可以自定义设置

CLASSICAL COATING SYSTEM

Please inquiry JIANBANG Paint for specific coating solutions.

Classic Coating System

Water-based Epoxy Zinc Rich Primer

2*40µm (dry film thickness)

Water-based Epoxy Intermediate Paint

 2*40µm (dry film thickness)

Water-based Epoxy Anti-corrosive Finish Paint

2*30μm(dry film thickness)

这里可以自定义设置

SAFETY AND HEALTH

Please refer to MSDS before using this product. If you do not fully understand the restrictions, or cannot follow MSDS directions strictly, do not use this product. This volatile product is flammable. Keep this product away from flame or fire. Smoking is strictly prohibited in working area. Keep working area ventilated during application to make sure solvent vapor content is low in the air. PPE is necessary to avoid this product contacting with eyes or skin. More detailed safety tips are based on practical situation.

Please handle used paint barrel correctly to avoid any pollution.

 

Storage:

Store this product in shady, dry, and ventilated warehouse. The storage temperature should above 0℃. The shelf life is 12 months at room temperature. If exceeding shelf life, the products shall be tested before using.

 

Disclaimer:

All technical data given in this document is based on our knowledge achieved in lab and practice, it is not completely correct. Although we try to keep the validity of our advice, however we cannot predict the practical conditions that will affect paint quality. Herein, we cannot be responsible for the consequences of variations in such conditions, or for unforeseen conditions. We reserve the right to modify this document without informing in advance.


Packing size

Packing weight

Part A20L
20KG
Part B6L5KG

Certificate

  • CE Certificate
    CE Certificate
  • Environmental Management Syatem ISO14001 New
    Environmental Management Syatem ISO14001 New
  • Occupational Health And Safety Management System OHSAS 18001 New
    Occupational Health And Safety Management System OHSAS 18001 New
  • Quality Management System ISO 9001 New
    Quality Management System ISO 9001 New
  • ROHS Report
    ROHS Report
  • SASO1
    SASO1
  • sgs1
    sgs1
  • sgs2
    sgs2
  • SRC
    SRC

PRODUCT MESSAGE

社媒暂无评论
Chat Online 编辑模式下无法使用
Leave Your Message inputting...
We will get back to you asap