High quality Waterborne paint Epoxy Iron Red Primer for bridges, steel structures and containers
PRODUCT DESCRIPTION
This product is a two-component waterborne coating composed of high-performance water-soluble modified epoxy resin, imported water-borne amine curing agent, anti-rust pigment, iron oxide red, etc.
Typical Uses:
This product is used as anti-corrosive primer and intermediate paint for petrochemical pipelines, pipe racks, storage tanks and machinery equipment. Meanwhile, it is also suitable for the bridges, steel structures, containers, gas cabinets, etc.
Application Guide
● Mixing:
Use the power mixer to mix the main paint evenly, and then as you stir it, you add the hardener until you get to mix well.
● Mixing Ratio:
Part A: Part B=20:4(by weight).
● Thinner:
Clean water
● Airless spray:
Nozzle tip: 0.017~0.023 inches
Spray pressure: 15~18Mpa
Thinner rate: 0~10%
● Brush, Roller:
Recommended for small areas only.
Must achieve required thickness.
DRYING SCHEDULE
Substrate temperature | 10°C | 20 °C | 30°C |
To touch(40um) | 6h | 4h | 3h |
To handle(40um) | 24h | 24h | 20h |
Min. recoating time | 24h | 24h | 20h |
| Max. recoating time | - | - | - |
| Pot life | 4h | 2h | 1h |
* Make sure no chalking and other contaminations before recoating. | |||
* Above data for reference only, actual drying time and recoating time is dependent on temperature, dry film thickness, ventilation condition. | |||
SURFACE TREATMENT
All surfaces to be coated shall be clean and dry. The surface shall be evaluated and treated according to ISO8504 standard.
Coated surface: applied on clean, dry and undamaged primer only.
APPLICATION
Application conditions: Substrate temperature shall be at 3 ℃higher than dew point, relative humidity less than 85%. Measurement of temperature and humidity should be close to substrate.
CLASSICAL COATING SYSTEM
Please inquiry JIANBANG Paint for specific coating solutions.
Waterborne Epoxy Iron Red Primer : 2*40µm (dry film thickness)
Waterborne Epoxy Anti-corrosive Finish Paint : 2*40µm (dry film thickness)
Waterborne Epoxy Intermediate Paint : 2*40µm (dry film thickness)
SAFETY AND HEALTH
Please refer to MSDS before using this product. If you do not fully understand the restrictions, or cannot follow MSDS directions strictly, do not use this product. This volatile product is flammable. Keep this product away from flame or fire. Smoking is strictly prohibited in working area. Keep working area ventilated during application to make sure solvent vapor content is low in the air. PPE is necessary to avoid this product contacting with eyes or skin. More detailed safety tips are based on practical situation.
Please handle used paint barrel correctly to avoid any pollution.
Storage:
Store this product in shady, dry, and ventilated warehouse. Storage temperature above 0℃, the shelf life is 12 months at room temperature. If exceeding shelf life, the products shall be tested before using.
Disclaimer:
All technical data given in this document is based on our knowledge achieved in lab and practice, it is not completely correct. Although we try to keep the validity of our advice, however we cannot predict the practical conditions that will affect paint quality. Herein, we cannot be responsible for the consequences of variations in such conditions, or for unforeseen conditions. We reserve the right to modify this document without informing in advance.
| Packaging | Packing size | Packing weight |
| Part A | 20L | 20KG |
| Part B | 5L | 4KG |
Certificate