Oriented by technology, we serve customers worldwide not only our high quality products, but also technical consultation and engineering scenarios.
PRODUCT DESCRIPTION
Alkyd Mica Iron Oxide Intermediate Paint is an anti-rust paint based on medium oil dry vegetable oil modified alkyd resin. This lead-free product has the advantages of non-toxicity, strong adhesion, good anti-rust ability and nitro resistance. In addition, under general climatic conditions, the product has great durability.
Typical Uses:
In light to medium corrosive environment, when matched with other alkyd paints, this product can be used on internal and external surface of steel plate and wood structure.
Application Guide
● Mixing:
Ready to use
● Thinner:
Alkyd thinner
● Airless Spray:
Nozzle tip: 0.017~0.023 inches
Spray pressure: 15~18Mpa
Thinner ratio: 5~15% (by weight
● Brush, Roller:
Recommended
Must achieve required thickness
Substrate temperature | 10 °C | 20 °C | 30 °C |
To touch (30μm) | 5h | 1h | 30min |
To handle (30μm) | 48h | 24h | 12h |
Min. recoating time | 36h | 24h | 12h |
Max. recoating time | 4h | 2h | 1h |
* Make sure no chalking and other contaminations before recoating. | |||
* Above data for reference only, actual drying time and recoating time is dependent on temperature, dry film thickness, ventilation condition. |
SURFACE TREATMENT
All surface to be coated shall be clean and dry. The surface shall be evaluated and treated according to ISO8504 standard. For bare steel, it shall be sandblasted to reach Sa2.5(iso8501-1:2007) standard. Depending on the environment of the non-immersed part, grinding with power tools is acceptable but shall at least reach St2(iso8501-1:2007) standard. For shop primed steel, the shop primer shall be clean, dry and approved. For surface painted coatings, this product can apply only to clean, dry and good compatible primer.
Classic Coating System
Chlorosulfonated Polyethylene Anti-corrosion Primer------ 2*40µm (dry film thickness)
Chlorosulfonated Polyethylene Anti-corrosionIntermediatePrimer------2*80µm (dry film thickness)
Chlorosulfonated Polyethylene Anti-corrosion Finish------ 2*30µm (dry film thickness)
SAFETY AND HEALTH
Please refer to MSDS before using this product. If you do not fully understand the restrictions, or cannot follow MSDS directions strictly, do not use this product. This volatile product is flammable. Keep this product away from flame or fire. Smoking is strictly prohibited in working area. Keep working area ventilated during application to make sure solvent vapor content is low in the air. PPE is necessary to avoid this product contacting with eyes or skin. More detailed safety tips are based on practical situation.
Please handle used paint barrel correctly to avoid any pollution.
Storage:
Store this product in shady, dry, and ventilated warehouse. Under room temperature, its shelf life is 12 months. If exceeding shelf life, the products shall be tested before using.
Disclaimer:
All technical data given in this document is based on our knowledge achieved in lab and practice, it is not completely correct. Although we try to keep the validity of our advice, however we cannot predict the practical conditions that will affect paint quality. Herein, we cannot be responsible for the consequences of variations in such conditions, or for unforeseen conditions. We reserve the right to modify this document without informing in advance.
Packing size | Packing weight | |
Part A | 20L | 20KG |
Part B | 5L | 4KG |
Copyright © 2020 Changzhou IMS New Materials Technology Co., Ltd. | All Rights Reserved | XML
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.