PRODUCT DESCRIPTION
Typical Uses:
Application Guide
● Mixing:
● Thinner:
Exclusive thinner
● Airless Spray:
Nozzle tip: 0.018~0.025 inches.
Spray pressure: 18~25Mpa
Thinner ratio: 5~15% (by weight of paint)
● Brush, Roller:
DRYING SCHEDULE
Substrate temperature | 10 °C | 20 °C | 30 °C |
To touch (30um) | 8h | 4h | 3min |
To handle (30um) | 36h | 24h | 24h |
Min. recoating time | 16h | 4h | 3h |
Max. recoating time | 10d | 7d | 5d |
Use time after mixing | 6h | 4h | 2h |
* Make sure no chalking and other contaminations before recoating. | |||
* Above data for reference only, actual drying time and recoating time is dependent on temperature, dry film thickness, ventilation condition. |
SURFACE TREATMENT
APPLICATION
Application conditions: Substrate temperature shall be 3 ℃ higher than dew point with relative humidity below 85%. Measurement of temperature and humidity should be conducted close to substrate.
CLASSICAL COATING SYSTEM
Please inquiry JIANBANG Paint for specific coating solutions.
Organic silicone heat-resistant primer (700℃)
2*40µm (dry film thickness)
Organic silicone haet-resistant topcoat (700℃)
2*30µm (dry film thickness)
SAFETY AND HEALTH
Please refer to MSDS before using this product. If you do not fully understand the restrictions, or cannot follow MSDS directions strictly, do not use this product. This volatile product is flammable. Keep this product away from flame or fire. Smoking is strictly prohibited in working area. Keep working area ventilated during application to make sure solvent vapor content is low in the air. PPE is necessary to avoid this product contacting with eyes or skin. More detailed safety tips are based on practical situation.
Please handle used paint barrel correctly to avoid any pollution.
Storage:
Store this product in shady, dry, and ventilated warehouse away from fire and heat. The shelf life is 12 months at room temperature.
Disclaimer:
All technical data given in this document is based on our knowledge achieved in lab and practice, it is not completely correct. Although we try to keep the validity of our advice, however we cannot predict the practical conditions that will affect paint quality. Herein, we cannot be responsible for the consequences of variations in such conditions, or for unforeseen conditions. We reserve the right to modify this document without informing in advance.
Packaging | Packing size | Packing weight |
Part A(iron barrel) | 20L | 20KG |
Part B(plastic barrel) | 4L | 2KG |
Certificate