Oriented by technology, we serve customers worldwide not only our high quality products, but also technical consultation and engineering scenarios.
PRODUCT DESCRIPTION
High Chlorinated Polyethylene Mica Iron Oxide Intermediate Paint is composed of high chlorinated polyethylene, epoxy resin, plasticizer, flake mica powder pigment, stabilizer, anti-settling agent, solvent, etc. Significantly, this paint can excellently resist moisture, water and chemicals. Furthermore, it is provided with great resistance to rust and chemical atmosphere. With strong adhesion, the coating is fast dying and easy to apply, forming the film of 45~50um after one-time painting.
Typical Uses:
This product can be used as the anti-corrosive intermediate paint for various steel equipment suffering from chemical atmosphere and industrial air. Meanwhile, it is suitable for the concrete facilities.
Application Guide
● Mixing:
Ready to use
● Thinner:
Exclusive thinner
● Airless Spray:
Nozzle tip: 0.018~0.025 inches
Spray pressure: 18~25Mpa
Thinner ratio: 5~15% (by weight of paint
● Brush, Roller:
Recommended
Must achieve required thickness
Substrate temperature | 10 °C | 20 °C | 30 °C |
To touch (30μm) | 2.5h | 1h | 30min |
To handle (30μm) | 48h | 24h | 12h |
Min. recoating time | 12h | 4h | 2h |
Max. recoating time | 4h | 2h | 1h |
* Make sure no chalking and other contaminations before recoating. | |||
* Above data for reference only, actual drying time and recoating time is dependent on temperature, dry film thickness, ventilation condition. |
SURFACE TREATMENT
The surface to be coated shall be clean, dry and free from contamination. Also, the surface shall be evaluated and treated according to ISO8504 standard.
Bare steel: sandblasting to reach Sa2.5(IOS8501-1:2007). For the non-soaking site, acceptable for power tool grinding, at least reach St2(IOS8501-1:2007).
Painted surface: only apply to clean, dry and intact compatible primer.
Classic Coating System
Chlorosulfonated Polyethylene Anti-corrosion Primer------ 2*40µm (dry film thickness)
Chlorosulfonated Polyethylene Anti-corrosionIntermediatePrimer------2*80µm (dry film thickness)
Chlorosulfonated Polyethylene Anti-corrosion Finish------ 2*30µm (dry film thickness)
SAFETY AND HEALTH
Please refer to MSDS before using this product. If you do not fully understand the restrictions, or cannot follow MSDS directions strictly, do not use this product. This volatile product is flammable. Keep this product away from flame or fire. Smoking is strictly prohibited in working area. Keep working area ventilated during application to make sure solvent vapor content is low in the air. PPE is necessary to avoid this product contacting with eyes or skin. More detailed safety tips are based on practical situation.
Please handle used paint barrel correctly to avoid any pollution.
Storage:
Store this product in shady, dry, and ventilated warehouse. Under room temperature, its shelf life is 12 months. If exceeding shelf life, the products shall be tested before using.
Disclaimer:
All technical data given in this document is based on our knowledge achieved in lab and practice, it is not completely correct. Although we try to keep the validity of our advice, however we cannot predict the practical conditions that will affect paint quality. Herein, we cannot be responsible for the consequences of variations in such conditions, or for unforeseen conditions. We reserve the right to modify this document without informing in advance.
Packing size | Packing weight | |
Part A | 20L | 20KG |
Part B | 5L | 4KG |
Copyright © 2020 Changzhou IMS New Materials Technology Co., Ltd. | All Rights Reserved | XML
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.