Strongly Weather-resistant Acrylic Finish Paint for Decoration
PRODUCT DESCRIPTION
Acrylic Finish is a physically drying product based on acrylic resin. It has excellent weather resistance, color and light retention, therefore, it is very suitable for decoration. Moreover, as this paint dries quickly, it can be used at low temperature.
Typical Uses:
This product is mainly used as decorative finish on various steel structure and concrete surfaces in both indoor and outdoor environments. More importantly, it has strong water resistance and is not easy to produce saponification.
Application Guide
● Mixing:
Ready to use.
● Thinner:
Acrylic thinner
● Airless spray:
Nozzle tip: 0.017~0.023 inches
Spray pressure: 15~18Mpa
Thinner ratio: 0~10% (by weight of paint)
● Brush, Roller:
Recommended
Must achieve required thickness
DRYING SCHEDULE
Substrate temperature | 10°C | 20 °C | 30°C |
To touch(40um) | 2h | 1h | 30min |
To handle(40um) | 8h | 4h | 3h |
| Min. recoating time | 8h | 4h | 3h |
| Max. recoating time | - | - | - |
* Make sure no chalking and other contaminations before recoating. | |||
* Above data for reference only, actual drying time and recoating time is dependent on temperature, dry film thickness, ventilation conditions, humidity, mechanical strength,etc. | |||
SURFACE TREATMENT
All surfaces to be coated shall be clean and dry. The surface shall be evaluated and treated according to ISO8504 standard.
For surface painted coatings, this product can apply only to clean, dry and good compatible primer.
APPLICATION
Application conditions: Substrate temperature shall be at 3 ℃higher than dew point, relative humidity less than 85%. Measurement of temperature and humidity should be close to substrate.
CLASSICAL COATING SYSTEM
Please inquiry JIANBANG Paint for specific coating solutions.
Classic Coating System
Epoxy Zinc Rich Primer------primer
2*30 µm (dry film thickness)
Epoxy Mica Iron Oxide Intermediate Paint------intermediate paint
2*50 µm (dry film thickness)
Acrylic Finish------finish
2*40 μm(dry film thickness)
SAFETY AND HEALTH
Please refer to MSDS before using this product. If you do not fully understand the restrictions, or cannot follow MSDS directions strictly, do not use this product. This volatile product is flammable. Keep this product away from flame or fire. Smoking is strictly prohibited in working area. Keep working area ventilated during application to make sure solvent vapor content is low in the air. PPE is necessary to avoid this product contacting with eyes or skin. More detailed safety tips are based on practical situation.
Please handle used paint barrel correctly to avoid any pollution.
Storage:
Store this product in shady, dry, and ventilated warehouse. Under room temperature, the shelf life is 12 months. If exceeding shelf life, the products shall be tested before using.
Disclaimer:
All technical data given in this document is based on our knowledge achieved in lab and practice, it is not completely correct. Although we try to keep the validity of our advice, however we cannot predict the practical conditions that will affect paint quality. Herein, we cannot be responsible for the consequences of variations in such conditions, or for unforeseen conditions. We reserve the right to modify this document without informing in advance.
Packing size | Packing weight |
20L | 22KG |
Certificate