PRODUCT DESCRIPTION
It is composed of high chlorinated polyethylene, epoxy resin, plasticizer, flake mica powder pigment, stabilizer, anti settling agent, solvent, etc. It has excellent resistance to humidity, water, chemicals, chemical atmosphere and rust. Meanwhile, it has good ground contact, strong adhesion and fast drying. One time, the film thickness is 45-50 microns, which can reduce the number of construction passes and facilitate the construction.
Typical Uses:
It can be used as the internal and external surface of steel plate structure in alkyd paint matching in light to medium corrosive environment.
Application Guide
● Mixing:
Ready to use.
● Airless spray:
Nozzle tip: 0.018~0.025 inches
Spray pressure: 18~25Mpa
● Brush, Roller:
Recommended for small areas only.
Must achieve required thickness.
Substrate temperature | 10°C | 20 °C | 30°C |
To touch(30um) | 2.5h | 1h | 30min |
To handle(30um) | 48h | 24h | 12h |
Min. recoating time | 12h | 4h | 2h |
* Make sure no chalking and other contaminations before recoating. | |||
* Above data for reference only, actual drying time and recoating time is dependent on temperature, dry film thickness, ventilation condition. |
SURFACE TREATMENT
All surfaces to be coated shall be clean and dry. The surface shall be evaluated and treated according to ISO8504 standard.
For bare steel, it shall be sandblasted to reach Sa2.5(ISO8501-1:2007) standard. Depending on the environment of the non-immersed part, grinding with power tools is acceptable but shall at least reach St2(ISO8501-1:2007) standard.
For shop primed steel, the shop primer shall be clean, dry and approved.
For surface painted coatings, this product can apply only to clean, dry and good compatible primer.
Classic Coating System
High Chlorinated Polyethylene Iron Oxide Red Paint------2*40µm (dry film thickness)
High Chlorinated Polyethylene Mica Iron Oxide Intermediate Paint------2*40µm (dry film thickness)
High Chlorinated Polyethylene Finish------2*30µm (dry film thickness)
SAFETY AND HEALTH
Please refer to MSDS before using this product. If you do not fully understand the restrictions, or cannot follow MSDS directions strictly, do not use this product. This volatile product is flammable. Keep this product away from flame or fire. Smoking is strictly prohibited in working area. Keep working area ventilated during application to make sure solvent vapor content is low in the air. PPE is necessary to avoid this product contacting with eyes or skin. More detailed safety tips are based on practical situation.
Please handle used paint barrel correctly to avoid any pollution.
Storage:
Store this product in shady, dry, and ventilated warehouse. The shelf life is 12 months at room temperature. If exceeding shelf life, the products shall be tested before using.
Disclaimer:
All technical data given in this document is based on our knowledge achieved in lab and practice, it is not completely correct. Although we try to keep the validity of our advice, however we cannot predict the practical conditions that will affect paint quality. Herein, we cannot be responsible for the consequences of variations in such conditions, or for unforeseen conditions. We reserve the right to modify this document without informing in advance.
Packing size | Packing weight |
20L | 25KG |
Copyright © 2020 Changzhou IMS New Materials Technology Co., Ltd. | All Rights Reserved | XML
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.