Customized Road Marking Paint Signing Paint From China

这里可以自定义设置

PRODUCT DESCRIPTION

The product is a single component paint composed of acrylic resin, color filler, auxiliary agent, solvent, etc. Meanwhile, the paint has tough film, strong adhesion, excellent wear resistance, water resistance, etc. Besides, paint film is clear and does not penetrate the asphalt surface.

Typical Uses:

This paint is mainly designed for asphalt road marking.

这里可以自定义设置

PRODUCT SELLING POINT

● Repair rate 0, no downtime cost.

● The coating structure is designed independently.

● Performance and color optimization customization.

● Provide construction plan and construction service.

● The contract is guaranteed for 20 years.

PRODUCT ADVANTAGES

Repair rate 0,no downtime cost

Acceptance of all

Extend the presservative time by 2.5 times

Save 250% maintenance cost

这里可以自定义设置

PRODUCT APPLICATION GUIDE

Mixing	Ready to use
Thinner	Acrylic paint thinner
Airless spray	Nozzle tip：0.017~0.023inch Spray pressure：15~18MPa Thinner ratio：0~15% (by weight of paint)
Brush、Roller	Recommended for small areas only. Must achieve required thickness.

MORE SPECIFIC COLORS PLEASE CONSULT US

DRYING SCHEDULE

Substrate Temperature	10 ℃	20 ℃	30 ℃
To touch(50um)	2h	1h	30min
To handle(50um)	8h	4h	3h
Min. recoating time	8h	4h	3h
Max. recoating time	-	-	-

* Make sure no chalking and other contaminations before recoating.

* Above data for reference only, actual drying time and recoating time is dependent on temperature, dry film thickness, ventilation conditions.

PRODUCT SPECIFICATIONS

Color	Yellow, red, white
Gloss	Glossy
Density	-1.3Kg/L(after mixing)
Solid Volume	(50±2 )%
Film thickness	100µm dry film thickness (about 200µm wet film thickness)
Theoretical spreading rate	3.84m²/Kg(50µm dry film thickness)
Full cure	(23±2℃)24h
Flash point	25℃

这里可以自定义设置

PRODUCT APPLICATION

Substrate temperature shall be at 3^oC higher than dew point, relative humidity less than 85%. Measurement of temperature and humidity should be close to substrate.