YMS PAINT Over 20 years experience in the production of customized industrial paint coatings

Durable Waterborne Fluorocarbon Finish Paint for building materials and exterior walls 1

Durable Waterborne Fluorocarbon Finish Paint for building materials and exterior walls 2

Durable Waterborne Fluorocarbon Finish Paint for building materials and exterior walls 3

Durable Waterborne Fluorocarbon Finish Paint for building materials and exterior walls 4

Durable Waterborne Fluorocarbon Finish Paint for building materials and exterior walls 5

Durable Waterborne Fluorocarbon Finish Paint for building materials and exterior walls

Film Thickness:

80µm dry film thickness (about 177µm wet film thickness)

Theoretical Spreading Rate:

4.68 m²/Kg (40µm dry film thickness)

Full Cure:

48 h

Color:

Customized

Usage:

Flat, Matte

Density:

~1.2 Kg/L

Solid Volume:

(45±2) %

Shelf Life:

12 months

To Touch, Minutes@23±2 °C:

2.5 h

To Handle, Hours@23±2 °C:

8 h

Inquiry

Write a Review

PRODUCT DESCRIPTION

Durable Waterborne Fluorocarbon Finish Paint for building materials and exterior walls 6

Waterborne fluorocarbon paint is an environmentally friendly one-component fluorocarbon coating mainly composed of water-based fluorocarbon resin with excellent performance. Meanwhile, it has excellent durability, easy construction, cleaning and long-term excellent light and color retention.

Typical Uses:

The product is applicable to all kinds of building exterior wall, roof and all kinds of building materials of super durable decorative protective coating, can greatly extend the service life of the building.

Durable Waterborne Fluorocarbon Finish Paint for building materials and exterior walls 7

Durable Waterborne Fluorocarbon Finish Paint for building materials and exterior walls 8

Application Guide

Durable Waterborne Fluorocarbon Finish Paint for building materials and exterior walls 9

● Mixing:

Ready to use.

● Thinner:

Clean water

● Airless spray:

Nozzle tip: 0.017~0.023 inches

Spray pressure: 15~18Mpa

Thinner ratio：0~10% (by weight of paint)

● Brush, Roller:

Recommended

Must achieve required thickness

DRYING SCHEDULE

Durable Waterborne Fluorocarbon Finish Paint for building materials and exterior walls 10

Substrate temperature	10°C	20°C	30°C
To touch(40um)	5h	2.5h	1.5h
To handle(40um)	20h	8h	4h
Min. recoating time	20h	8h	4h
Max. recoating time	-	-	-
* Make sure no chalking and other contaminations before recoating.
* Above data for reference only, actual drying time and recoating time is dependent on temperature, dry film thickness, ventilation conditions, humidity, mechanical strength,etc.

Durable Waterborne Fluorocarbon Finish Paint for building materials and exterior walls 11

SURFACE TREATMENT

Durable Waterborne Fluorocarbon Finish Paint for building materials and exterior walls 12

All surfaces to be coated shall be clean and dry. The surface shall be evaluated and treated according to ISO8504 standard.
Coated surface: applied on clean, dry and undamaged primer only.

APPLICATION

Durable Waterborne Fluorocarbon Finish Paint for building materials and exterior walls 13

Application conditions: Substrate temperature shall be at 3 ℃higher than dew point, relative humidity less than 85%. Measurement of temperature and humidity should be close to substrate.

Durable Waterborne Fluorocarbon Finish Paint for building materials and exterior walls 14

Durable Waterborne Fluorocarbon Finish Paint for building materials and exterior walls 15

Durable Waterborne Fluorocarbon Finish Paint for building materials and exterior walls 16

Durable Waterborne Fluorocarbon Finish Paint for building materials and exterior walls 17

Durable Waterborne Fluorocarbon Finish Paint for building materials and exterior walls 18

Durable Waterborne Fluorocarbon Finish Paint for building materials and exterior walls 19

CLASSICAL COATING SYSTEM

Durable Waterborne Fluorocarbon Finish Paint for building materials and exterior walls 20

Please inquiry JIANBANG Paint for specific coating solutions.

Durable Waterborne Fluorocarbon Finish Paint for building materials and exterior walls 21

Classic Coating System

Waterborne Epoxy Primer

2*40 µm (dry film thickness)

Waterborne Fluorocarbon Finish Paint

2*40 µm (dry film thickness)

Waterborne Epoxy Intermediate Paint

2*40 μm(dry film thickness)

SAFETY AND HEALTH

Durable Waterborne Fluorocarbon Finish Paint for building materials and exterior walls 22

Please refer to MSDS before using this product. If you do not fully understand the restrictions, or cannot follow MSDS directions strictly, do not use this product. This volatile product is flammable. Keep this product away from flame or fire. Smoking is strictly prohibited in working area. Keep working area ventilated during application to make sure solvent vapor content is low in the air. PPE is necessary to avoid this product contacting with eyes or skin. More detailed safety tips are based on practical situation.
Please handle used paint barrel correctly to avoid any pollution.

Storage:

Storage temperature above 0℃, stored in a cool, clean, dry place from 0 to 35℃, storage period of 12 months.

Disclaimer:

All technical data given in this document is based on our knowledge achieved in lab and practice, it is not completely correct. Although we try to keep the validity of our advice, however we cannot predict the practical conditions that will affect paint quality. Herein, we cannot be responsible for the consequences of variations in such conditions, or for unforeseen conditions. We reserve the right to modify this document without informing in advance.

Durable Waterborne Fluorocarbon Finish Paint for building materials and exterior walls 23

Packing size	Packing weight
20L	22KG

Certificate

Durable Waterborne Fluorocarbon Finish Paint for building materials and exterior walls 24

Durable Waterborne Fluorocarbon Finish Paint for building materials and exterior walls 25

CE Certificate

Durable Waterborne Fluorocarbon Finish Paint for building materials and exterior walls 26

Environmental Management Syatem ISO14001 New

Durable Waterborne Fluorocarbon Finish Paint for building materials and exterior walls 27

Occupational Health And Safety Management System OHSAS 18001 New

Durable Waterborne Fluorocarbon Finish Paint for building materials and exterior walls 28

Quality Management System ISO 9001 New

Durable Waterborne Fluorocarbon Finish Paint for building materials and exterior walls 29

ROHS Report

Durable Waterborne Fluorocarbon Finish Paint for building materials and exterior walls 30

SASO1

Durable Waterborne Fluorocarbon Finish Paint for building materials and exterior walls 31

sgs1

Durable Waterborne Fluorocarbon Finish Paint for building materials and exterior walls 32

sgs2

Durable Waterborne Fluorocarbon Finish Paint for building materials and exterior walls 33

SRC

Get in touch with us

YMS Industrial paint suppliers core products, including anti corrosive paint, antirust paint, acid & alkali resisting paint, heat resisting paint, building & floor paint etc., help protect and extend substrate life for years.