PRODUCT SELLING POINT
● Nanotechnology, compact structure.
● Salt spray corrosion resistance ≥3000h,Resistance to aging≥5000h.
● 98% concentrated sulfuric acid for 1200h.
● Resistance to 30% hydrochloric acid for 1200h.
●Factory direct sale.
Use the power mixer to mix the main paint evenly, and then as you stir it, you add the hardener until you get to mix well. Generally speaking, if the temperature is below 10 ℃, it needs 30 min induction time; if the temperature is over 10℃, it needs 15 min induction time.
Epoxy paint thinner
Part A: Part B = 25:3 (by weight)
Nozzle tip: 0.018~0.027inches
Spray pressure: 15~18Mpa
Thinner ratio: 5~15% (by weight of paint)
Must achieve required thickness.
* Make sure no chalking and other contaminations before recoating. If necessary, stucco thoroughly before coating.
* Above data for reference only, actual drying time and recoating time is dependent on temperature, dry film thickness, ventilation conditions, humidity, mechanical strength, etc.
Epoxy zinc phosphate curing agent
Standard Film thickness
100um dry film thickness (about 200um wet film thickness)
Theoretical spreading rate
3.52m²/Kg (100um dry film thickness)
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.