Oriented by technology, we serve customers worldwide not only our high quality products, but also technical consultation and engineering scenarios.
PRODUCT DESCRIPTION
The product is composed of water-based acrylic resin, weather-resistant, corrosion-resistant filler and water. This product uses water as the dispersing medium, has no ignition point at room temperature, does not burn or explode, the construction process and the coating film forming process all does not have the poisonous harmful substance to produce, conforms to the environmental protection request. Meanwhile, it has excellent water resistance, thick coating, waterproof, weatherproof, anti-flash rust, etc. Besides, this coating has low VOC, and with most of the water and oil primer matching performance. What’s more, this paint film is compact, has excellent water resistance and heat resistance. Furthermore, the film also combines the high hardness, excellent resistance to chemical corrosion, excellent aging resistance and excellent uv resistance.
Typical Uses:
The product is used with epoxy primer, mainly used as the heavy anticorrosive coating for the bridge and container. Besides, it is also applicable to metal surface such as all kinds of light industrial products, electromechanical or instrument, etc.
Application Guide
● Mixing:
Ready to use.
● Thinner:
Clean water
● Thinner ratio:
Add water according to the weight of original paint 10% or so, or make right amount adjustment according to specific situation, the maximum amount is no more than 20% .
● Airless spray:
Nozzle tip: 0.017~0.023 inches
Spray pressure: 15~18Mpa
Spray viscosity: 60-80s
● Brush, Roller:
Roller coating viscosity: 70-100s (Tu-4 cup, 23±2°C)
Brush with a soft wool brush and wool roller
Recommended
Must achieve required thickness
Substrate temperature | 10°C | 20°C | 30°C |
To touch(30um) | 4h | 2h | 1.5h |
To handle(30um) | 24h | 24h | 20h |
Min. recoating time | 24h | 24h | 20h |
Max. recoating time | - | - | - |
* Make sure no chalking and other contaminations before recoating. | |||
* Above data for reference only, actual drying time and recoating time is dependent on temperature, dry film thickness, ventilation conditions, humidity, mechanical strength,etc. |
SURFACE TREATMENT
All surfaces to be coated shall be clean and dry. The surface shall be evaluated and treated according to ISO8504 standard.
For surface painted coatings, this product can apply only to clean, dry and good compatible primer.
Classic Coating System
Waterborne Epoxy Zinc Rich Primer
2*40 µm (dry film thickness)
Waterborne Acrylic Finish Paint
2*30 µm (dry film thickness)
Waterborne Epoxy Intermediate Paint
2*40 μm(dry film thickness)
SAFETY AND HEALTH
Please refer to MSDS before using this product. If you do not fully understand the restrictions, or cannot follow MSDS directions strictly, do not use this product. This volatile product is flammable. Keep this product away from flame or fire. Smoking is strictly prohibited in working area. Keep working area ventilated during application to make sure solvent vapor content is low in the air. PPE is necessary to avoid this product contacting with eyes or skin. More detailed safety tips are based on practical situation.
Please handle used paint barrel correctly to avoid any pollution.
Storage:
Store this product in shady, dry, and ventilated warehouse. Storage temperature above 0℃, the shelf life is 12 months at room temperature. If exceeding shelf life, the products shall be tested before using.
Disclaimer:
All technical data given in this document is based on our knowledge achieved in lab and practice, it is not completely correct. Although we try to keep the validity of our advice, however we cannot predict the practical conditions that will affect paint quality. Herein, we cannot be responsible for the consequences of variations in such conditions, or for unforeseen conditions. We reserve the right to modify this document without informing in advance.
Packing size | Packing weight |
20L | 22KG |
Copyright © 2020 Changzhou IMS New Materials Technology Co., Ltd. | All Rights Reserved | XML
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.