Instructions for the construction of high temperature resistant coatings
1.Base material processing
1)Base material sandblasting derusting to Sa 2.5 level
2)Manual rust removal to St 3.0 level
2.Environmental conditions
1)The ambient temperature is between -5℃ and 35℃
2)Humidity ≦ 85%
3.Application way
1)The workpiece is small, the finish is small, using brushing and rolling coating.
2)The workpiece is large, the finish is large ,using airless spraying.
4.Nozzle diameter: 0.017-0.023Inch
5.Spray gun pressure:15-18Mpa
6.Attentions: The amount of paint and pressure to be matched, the small pressure will rusult in the hanging; the large pressure will result in the dry shotcrete.