After forming, the steel is faced with a variety of corrosion, if not protected, soon rust corrosion, can not be used for production, at this time, it is necessary to take measures to protect, both economic and affordable method is to use water-based inorganic zinc rich primer.  

Steel in the process of storage to use, often after a long period of time, if not protected, not only can make the steel rust, also can reduce the service life of steel, but because of the traveler, companies are often reluctant to invest to protect, water-borne inorganic zinc-rich primer, actually does not need too much investment, rather than dealing with rusty steel, the cost would be lower.  Jianbang water-based inorganic zinc rich primer, zinc content up to 60~80%, in the initial protection of steel, as long as 20~40μm can be sprayed, the cost is about 1 yuan/square meter, not only reduce the investment, but also reduce the steel later sandblasting processing process. 

Not using waterborne inorganic zinc - rich steel primers

Steel with water-based inorganic zinc - rich primer

YMS Waterborne inorganic zinc-rich primer, is a thick coating of anticorrosion primer, due to their high film thickness, can reach more than 200 microns, paint anticorrosion time greatly extended, not only can be a short-term saving steel corrosion, also can be used as a long-term anti-corrosion primer, steel for enterprises who have the consciousness of environmental protection, water-borne inorganic zinc-rich primer more greatly reduces the emissions of pollutants,  It is a kind of health and environmental protection anticorrosive coating.