YMS PAINT Over 20 years experience in the production of customized industrial paint coatings

Non-toxic Building Paint Exclusive Putty for inner and outer walls 1

Non-toxic Building Paint Exclusive Putty for inner and outer walls 2

Non-toxic Building Paint Exclusive Putty for inner and outer walls 3

Non-toxic Building Paint Exclusive Putty for inner and outer walls 4

Non-toxic Building Paint Exclusive Putty for inner and outer walls 5

Non-toxic Building Paint Exclusive Putty for inner and outer walls 6

Non-toxic Building Paint Exclusive Putty for inner and outer walls 7

Non-toxic Building Paint Exclusive Putty for inner and outer walls

Film Thickness:

1 mm dry film thickness (about 1.54 mm wet film thickness)

Theoretical Spreading Rate:

0.54 m²/Kg (1 mm dry film thickness)

Full Cure:

(23±2℃) 7 d

Color:

Light yellow, Off white

Usage:

No gloss

Density:

~1.2 Kg/L(after mixing)

Solid Volume:

(65±2 )%

Shelf Life:

3 months

Inquiry

Write a Review

PRODUCT DESCRIPTION

Non-toxic Building Paint Exclusive Putty for inner and outer walls 8

This product is composed of putty special polymer, auxiliary agent and white cement. Meanwhile, this putty has excellent bond strength with the substrate, good water resistance, alkali resistance and small permeability. Besides, the putty construction is good, non-toxic, safe.

Typical Uses:

This product is suitable for the repair of the missing edges and missing corners of the inner and outer walls which use the concrete, cement mortar and brick as the base material. Besides, it is also applicable to repair the pockmarked surface and gap filling.

Non-toxic Building Paint Exclusive Putty for inner and outer walls 9

Non-toxic Building Paint Exclusive Putty for inner and outer walls 10

Application Guide

Non-toxic Building Paint Exclusive Putty for inner and outer walls 11

● Mixing:

Ready to use

● Thinner:

Clean water.

● Coating interval:

Minimum 3h.

● Next matching:

Using the advanced construction latex coating sealing primer.

● Tool cleaning:

Clean water.

Non-toxic Building Paint Exclusive Putty for inner and outer walls 12

SURFACE TREATMENT

Non-toxic Building Paint Exclusive Putty for inner and outer walls 13

Surface treatment of each base course: the quality of the cement slurry and concrete base course shall conform to JGJ73-91 code for construction and acceptance of building decoration engineering. The base surface must be clean, dry, firm, free of grease and other dirt, with a PI value less than 10. If have the metope of old besmear film, answer will loose, fall off, the besmear film that powdery is cleared clean, grind with sandpaper level off. In case of mildew on the wall, wash with 25% bleach in hot water. Leave the washing solution on the surface for 10 minutes. Then rinse surface thoroughly with clean water, surface should dry for 48 hours before applying. The surface and gap should be coated with the company's construction materials special putty wipe flat. After the treatment of the wall, the wall should be dry as soon as possible after the construction, so as to avoid re-pollution.

APPLICATION

Non-toxic Building Paint Exclusive Putty for inner and outer walls 14

Application conditions: Substrate temperature shall be at 3℃ higher than dew point, relative humidity less than 85%. Measurement of temperature and humidity should be close to substrate.

Non-toxic Building Paint Exclusive Putty for inner and outer walls 15

Non-toxic Building Paint Exclusive Putty for inner and outer walls 16

Non-toxic Building Paint Exclusive Putty for inner and outer walls 17

Non-toxic Building Paint Exclusive Putty for inner and outer walls 18

Non-toxic Building Paint Exclusive Putty for inner and outer walls 19

Non-toxic Building Paint Exclusive Putty for inner and outer walls 20

CLASSICAL COATING SYSTEM

Non-toxic Building Paint Exclusive Putty for inner and outer walls 21

Please inquire JIANBANG Paint for specific coating solutions.

Non-toxic Building Paint Exclusive Putty for inner and outer walls 22

Construction Latex Coating Sealing Primer: 1*20µm (dry film thickness)

Building Paint Exclusive Putty: 1~2mm (dry film thickness)

Advanced Construction Latex Coating Finish Paint: 2*60µm (dry film thickness)

SAFETY AND HEALTH

Non-toxic Building Paint Exclusive Putty for inner and outer walls 23

Please refer to MSDS before using this product. If you do not fully understand the restrictions, or cannot follow MSDS directions strictly, do not use this product. This volatile product is flammable. Keep this product away from flame or fire. Smoking is strictly prohibited in working area. Keep working area ventilated during application to make sure solvent vapor content is low in the air. PPE is necessary to avoid this product contacting with eyes or skin. More detailed safety tips are based on practical situation.

Please handle used paint barrel correctly to avoid any pollution.

Storage:

Store this product in shady, dry, ventilated and away from heat sources warehouse. The shelf life is 3 months at room temperature. If exceeding shelf life, the products shall be tested before using.

Disclaimer:

All technical data given in this document is based on our knowledge achieved in lab and practice, it is not completely correct. Although we try to keep the validity of our advice, however we cannot predict the practical conditions that will affect paint quality. Herein, we cannot be responsible for the consequences of variations in such conditions, or for unforeseen conditions. We reserve the right to modify this document without informing in advance.

Non-toxic Building Paint Exclusive Putty for inner and outer walls 24

Packing size	Packing weight
20L	25 KG

Certificate

Non-toxic Building Paint Exclusive Putty for inner and outer walls 25

Non-toxic Building Paint Exclusive Putty for inner and outer walls 26

CE Certificate

Non-toxic Building Paint Exclusive Putty for inner and outer walls 27

Environmental Management Syatem ISO14001 New

Non-toxic Building Paint Exclusive Putty for inner and outer walls 28

Occupational Health And Safety Management System OHSAS 18001 New

Non-toxic Building Paint Exclusive Putty for inner and outer walls 29

Quality Management System ISO 9001 New

Non-toxic Building Paint Exclusive Putty for inner and outer walls 30

ROHS Report

Non-toxic Building Paint Exclusive Putty for inner and outer walls 31

SASO1

Non-toxic Building Paint Exclusive Putty for inner and outer walls 32

sgs1

Non-toxic Building Paint Exclusive Putty for inner and outer walls 33

sgs2

Non-toxic Building Paint Exclusive Putty for inner and outer walls 34

SRC

Get in touch with us

YMS Industrial paint suppliers core products, including anti corrosive paint, antirust paint, acid & alkali resisting paint, heat resisting paint, building & floor paint etc., help protect and extend substrate life for years.