YMS PAINT Over 20 years experience in the production of customized industrial paint coatings

Nontoxic Waterborne Polyurethane Finish Paint for metal surface such as the electrical equipment or vehicles 1

Nontoxic Waterborne Polyurethane Finish Paint for metal surface such as the electrical equipment or vehicles 2

Nontoxic Waterborne Polyurethane Finish Paint for metal surface such as the electrical equipment or vehicles 3

Nontoxic Waterborne Polyurethane Finish Paint for metal surface such as the electrical equipment or vehicles 4

Nontoxic Waterborne Polyurethane Finish Paint for metal surface such as the electrical equipment or vehicles 5

Nontoxic Waterborne Polyurethane Finish Paint for metal surface such as the electrical equipment or vehicles

Adhesion Strength:

1 level

Film Thickness:

60µm dry film thickness (about 171µm wet film thickness)

Theoretical Spreading Rate:

4.86 m²/Kg (60µm dry film thickness)

Color:

Customized

Usage:

Flat, High gloss, Matte

Density:

~1.2 Kg/L

Solid Volume:

(35±2) %

Shelf Life:

12 months

To Touch, Minutes@23±2 °C:

2 h

To Handle, Hours@23±2 °C:

24 h

Pot Life, Hours@23±2℃ :

2 h

Inquiry

Write a Review

PRODUCT DESCRIPTION

Nontoxic Waterborne Polyurethane Finish Paint for metal surface such as the electrical equipment or vehicles 6

The product is a crosslinked two-component paint composed of the hydroxy water-based acrylic resin ammonia, weather-resistant, corrosion-resistant pigment filler, isocyanate (diurethane), etc.

Typical Uses:

The product is designed for the metal surface for various light industrial products, mechanical and electrical equipment, instruments, vehicles, etc.

Nontoxic Waterborne Polyurethane Finish Paint for metal surface such as the electrical equipment or vehicles 7

Nontoxic Waterborne Polyurethane Finish Paint for metal surface such as the electrical equipment or vehicles 8

Application Guide

Nontoxic Waterborne Polyurethane Finish Paint for metal surface such as the electrical equipment or vehicles 9

● Mixing:

Use the power mixer to mix the main paint evenly, and then as you stir it, you add the hardener until you get to mix well.

● Thinner:

Clean water

● Airless spray:

Nozzle tip: 0.017~0.023 inches

Spray pressure: 15~18Mpa

Thinner ratio：0~10% (by weight of paint)

● Brush, Roller:

Recommended

Must achieve required thickness

DRYING SCHEDULE

Nontoxic Waterborne Polyurethane Finish Paint for metal surface such as the electrical equipment or vehicles 10

Substrate temperature	10°C	20°C	30°C
To touch(30um)	4h	2h	1.5h
To handle(30um)	24h	24h	20h
Min. recoating time	24h	24h	20h
Max. recoating time	-	-	-
Pot life	4h	2h	1h
* Make sure no chalking and other contaminations before recoating.
* Above data for reference only, actual drying time and recoating time is dependent on temperature, dry film thickness, ventilation conditions, humidity, mechanical strength,etc.

Nontoxic Waterborne Polyurethane Finish Paint for metal surface such as the electrical equipment or vehicles 11

SURFACE TREATMENT

Nontoxic Waterborne Polyurethane Finish Paint for metal surface such as the electrical equipment or vehicles 12

Safely remove impurities on the surface of the workpiece to be coated, such as floating dust, floating rust, oil and so on, so that the surface of the workpiece to be coated is clean and dry.

APPLICATION

Nontoxic Waterborne Polyurethane Finish Paint for metal surface such as the electrical equipment or vehicles 13

Application conditions: Substrate temperature shall be at 3 ℃higher than dew point, relative humidity less than 85%. Measurement of temperature and humidity should be close to substrate.

Nontoxic Waterborne Polyurethane Finish Paint for metal surface such as the electrical equipment or vehicles 14

Nontoxic Waterborne Polyurethane Finish Paint for metal surface such as the electrical equipment or vehicles 15

Nontoxic Waterborne Polyurethane Finish Paint for metal surface such as the electrical equipment or vehicles 16

Nontoxic Waterborne Polyurethane Finish Paint for metal surface such as the electrical equipment or vehicles 17

Nontoxic Waterborne Polyurethane Finish Paint for metal surface such as the electrical equipment or vehicles 18

Nontoxic Waterborne Polyurethane Finish Paint for metal surface such as the electrical equipment or vehicles 19

CLASSICAL COATING SYSTEM

Nontoxic Waterborne Polyurethane Finish Paint for metal surface such as the electrical equipment or vehicles 20

Please inquiry JIANBANG Paint for specific coating solutions.

Nontoxic Waterborne Polyurethane Finish Paint for metal surface such as the electrical equipment or vehicles 21

Classic Coating System

Waterborne Epoxy Zinc Rich Primer

2*40 µm (dry film thickness)

Waterborne Polyurethane Finish Paint

2*30 µm (dry film thickness)

Waterborne Epoxy Intermediate Paint

2*40 μm(dry film thickness)

SAFETY AND HEALTH

Nontoxic Waterborne Polyurethane Finish Paint for metal surface such as the electrical equipment or vehicles 22

Please refer to MSDS before using this product. If you do not fully understand the restrictions, or cannot follow MSDS directions strictly, do not use this product. This volatile product is flammable. Keep this product away from flame or fire. Smoking is strictly prohibited in working area. Keep working area ventilated during application to make sure solvent vapor content is low in the air. PPE is necessary to avoid this product contacting with eyes or skin. More detailed safety tips are based on practical situation.
Please handle used paint barrel correctly to avoid any pollution.

Storage:

Store this product in shady, dry, and ventilated warehouse. Storage temperature above 0℃, the shelf life is 12 months at room temperature. If exceeding shelf life, the products shall be tested before using.

Disclaimer:

All technical data given in this document is based on our knowledge achieved in lab and practice, it is not completely correct. Although we try to keep the validity of our advice, however we cannot predict the practical conditions that will affect paint quality. Herein, we cannot be responsible for the consequences of variations in such conditions, or for unforeseen conditions. We reserve the right to modify this document without informing in advance.

Nontoxic Waterborne Polyurethane Finish Paint for metal surface such as the electrical equipment or vehicles 23

Packaging	Packing size	Packing weight
Part A	20L	20KG
Part B	6L	5KG

Certificate

Nontoxic Waterborne Polyurethane Finish Paint for metal surface such as the electrical equipment or vehicles 24

Nontoxic Waterborne Polyurethane Finish Paint for metal surface such as the electrical equipment or vehicles 25

CE Certificate

Nontoxic Waterborne Polyurethane Finish Paint for metal surface such as the electrical equipment or vehicles 26

Environmental Management Syatem ISO14001 New

Nontoxic Waterborne Polyurethane Finish Paint for metal surface such as the electrical equipment or vehicles 27

Occupational Health And Safety Management System OHSAS 18001 New

Nontoxic Waterborne Polyurethane Finish Paint for metal surface such as the electrical equipment or vehicles 28

Quality Management System ISO 9001 New

Nontoxic Waterborne Polyurethane Finish Paint for metal surface such as the electrical equipment or vehicles 29

ROHS Report

Nontoxic Waterborne Polyurethane Finish Paint for metal surface such as the electrical equipment or vehicles 30

SASO1

Nontoxic Waterborne Polyurethane Finish Paint for metal surface such as the electrical equipment or vehicles 31

sgs1

Nontoxic Waterborne Polyurethane Finish Paint for metal surface such as the electrical equipment or vehicles 32

sgs2

Nontoxic Waterborne Polyurethane Finish Paint for metal surface such as the electrical equipment or vehicles 33

SRC

Get in touch with us

YMS Industrial paint suppliers core products, including anti corrosive paint, antirust paint, acid & alkali resisting paint, heat resisting paint, building & floor paint etc., help protect and extend substrate life for years.