PRODUCT DESCRIPTION
PRODUCT SELLING POINT
● Repair rate 0, no downtime cost.
● The coating structure is designed independently.
● Performance and color optimization customization.
● Provide construction plan and construction service.
.
● The contract is guaranteed for 20 years.
Mixing | Use the power mixer to mix the main paint evenly, and then as you stir it, you add the hardener until you get to mix well. |
Mixing Ratio | Part A: Part B = 20:5 (by weight) |
Thinner | Epoxy paint exclusive thinner |
Airless spray | Nozzle tip:0.017~0.023inch Spray pressure:15~18MPa Thinner ratio:0~15% (by weight of paint) |
Brush、Roller | Recommended. Must achieve required thickness. |
Substrate Temperature | 10 ℃ | 20 ℃ | 30 ℃ |
To touch(60um) | 8h | 4h | 3h |
To handle(60um) | 48h | 24h | 24h |
Min. recoating time | 8h | 4h | 3h |
Max. recoating time | - | - | - |
Pot life | 4h | 2h | 1h |
* Make sure no chalking and other contaminations before recoating.
* Above data for reference only, actual drying time and recoating time is dependent on temperature, dry film thickness, ventilation conditions,humidity, mechanical strength, etc.
Color | Black, grey |
Gloss | No Gloss |
Density | -1.2Kg/L(after mixing) |
Hardnes | Oil resistant paint curing agent |
Solid Volume | (50±2 )% |
Standed Film thickness | 120µm dry film thickness (about 240µm wet film thickness) |
Theoretical spreading rate | 3.47m²/Kg(100µm dry film thickness) |
Full Cure | (23±2℃) 24h |
Flash point | 27℃ |
———————————————————————————————————————————————————————————————————————————————————————————————————————————————————————
———————————————————————————————————————————————————————————————————————————————————————————————————————————————————————
Copyright © 2020 Changzhou IMS New Materials Technology Co., Ltd. | All Rights Reserved | XML
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.