Polyurethane Paint

这里可以自定义设置

PRODUCT DESCRIPTION

This two-component product is mainly prepared by polyurethane resin, weatherable pigments, zinc phosphate and isocyanate as curing agent.This product features excellent resistance to:

●Fastdry

●Good adhesion to steel and galvanized steel

●Unlimited recoatable

●Cures at temperatures down to -5oC

●Good color and gloss retention

●Chemical substances

Typical Uses:

This product is best for metal substrate in severe corrosive medium, that requires high standard retention of gloss and color such as：

●Gas&oil storage tank

●Bridges

●Shipyard

●Galvanized work piece

●Iron tower

●Chemical plants

●Offshore platforms

●Petrochemicalplants

这里可以自定义设置

PRODUCT SELLING POINT

● Nanotechnology, compact structure.

● Salt spray corrosion resistance ≥3000h,Resistance to aging≥5000h.

● 98% concentrated sulfuric acid for 1200h.

● Resistance to 30% hydrochloric acid for 1200h.

●Factory direct sale.

PRODUCT ADVANTAGES

Repair rate 0, no downtime cost.Acceptance of all.

Extend the preservative time by 2.5 times.

Qualified for export of hazardous chemicals.

Performance and color optimization customization

这里可以自定义设置

PRODUCT APPLICATION GUIDE

Mixing	Mix part A and part B as 24:4 by weight. Slowly add part B in to part A and ensure mixed completely.
Thinner	T-009 fluorocarbon paint thinner ≤10% w./w.
Cleaner	T-009 fluorocarbon paint thinner
Airless spray	Nozzle tip: 0.017~0.023inches minimum 150 bar/2100 psi.
Brush, Roller	Recommended

MORE SPECIFIC COLORS PLEASE CONSULT US

DRYING SCHEDULE

Substrate Temperature	10 ℃	20 ℃	30 ℃
To touch(30um)	5h	2.5h	1.5h
To handle(30um)	24h	8h	4h
Min. recoating time	24h	8h	4h
Max. recoating time	-	-	-
Pot life	4h	2h	1h

* Make sure no chalking and other contaminations before recoating. If necessary, stucco thoroughly before coating.

* Above data for reference only, actual drying time and recoating time is dependent on temperature, dry film thickness, ventilation conditions, humidity, mechanical strength, etc.

PRODUCT SPECIFICATIONS

Color	Customized
Gloss	High gloss
Density	~1.25Kg/L(after mixing)
Hardness	Polyurethane paint thinner
Solid Volume	(50±2 )%
Standard Film thickness	60um dry film thickness (about 120um wet film thickness)
Theoretical spreading rate	6.67m²/Kg (60um dry film thickness)
Full cure	(23℃±2 )7d
Flash point	33℃

这里可以自定义设置

PRODUCT APPLICATION

Substrate temperature shall be at 3 ℃ higher than dew point, relative humidity less than 80%. Measurement of temperature and humidity should be close to substrate.