YMS PAINT Over 20 years experience in the production of customized industrial paint coatings

ST-3 Rust Converter Marine Primer Paint 1

ST-3 Rust Converter Marine Primer Paint 2

ST-3 Rust Converter Marine Primer Paint 3

ST-3 Rust Converter Marine Primer Paint

Theoretical Spreading Rate:

20m²/Kg (20µm dry film thickness)

Full Cure:

(23±2oC) 7d

Color:

Oyster white

Density:

~1.12Kg/L

Solid Volume:

(40±2) %

Standard Film Thickness:

210 °C

PH:

1.2-2.0

Heat Resistance:

Heat resistance

Inquiry

Write a Review

PRODUCT DESCRIPTION

ST-3 Rust Converter Marine Primer Paint 4

This product is based on aliphatic isocyanates and hydroxy resins, and has strong weather resistance. Meanwhile, the paint film is firm and glossy. Besides, it is a good choice for decoration as it won’t be powdered or get yellow easily. What’s more, its resistance to chemical and water is remarkable.

Typical Uses:

This product is commonly used as high-performance decorative coating for steel structure and aluminum alloy.

ST-3 Rust Converter Marine Primer Paint 5

ST-3 Rust Converter Marine Primer Paint 6

PRODUCT SELLING POINT

ST-3 Rust Converter Marine Primer Paint 7

● Nanotechnology, compact structure.

● Salt spray corrosion resistance ≥3000h,Resistance to aging≥5000h.

● 98% concentrated sulfuric acid for 1200h.

● Resistance to 30% hydrochloric acid for 1200h.

●Factory direct sale.

PRODUCT ADVANTAGES

ST-3 Rust Converter Marine Primer Paint 8

ST-3 Rust Converter Marine Primer Paint 9

Repair rate 0, no downtime cost.Acceptance of all.

ST-3 Rust Converter Marine Primer Paint 10

Extend the preservative time by 2.5 times.

ST-3 Rust Converter Marine Primer Paint 11

Qualified for export of hazardous chemicals.

ST-3 Rust Converter Marine Primer Paint 12

Performance and color optimization customization

PRODUCT APPLICATION GUIDE

ST-3 Rust Converter Marine Primer Paint 13

Mixing	Use the power mixer to mix the main paint evenly, and then as you stir it, you add the hardener until you get to mix well.
Thinner	Polyurethane paint thinner
Mixing ratio	Part A: Part B = 20:4(by weight)
Airless spray	Nozzle tip: 0.017~0.025inches Spray pressure: 18~25Mpa Thinner ratio:0~15% (by weight of paint)
Brush, Roller	Recommended Must achieve required thickness.

MORE SPECIFIC COLORS PLEASE CONSULT US

ST-3 Rust Converter Marine Primer Paint 14

ST-3 Rust Converter Marine Primer Paint 15

DRYING SCHEDULE

ST-3 Rust Converter Marine Primer Paint 16

Substrate Temperature	10 ℃	20 ℃	30 ℃
To touch(30um)	5h	2.5h	1.5h
To handle(30um)	24h	8h	4h
Min. recoating time	24h	8h	4h
Max. recoating time	-	-	-
Pot life	4h	2h	1h

* Make sure no chalking and other contaminations before recoating. If necessary, stucco thoroughly before coating.

* Above data for reference only, actual drying time and recoating time is dependent on temperature, dry film thickness, ventilation conditions, humidity, mechanical strength, etc.

PRODUCT SPECIFICATIONS

Color	Customized
Gloss	High gloss
Density	~1.25Kg/L(after mixing)
Hardness	Polyurethane paint thinner
Solid Volume	(50±2 )%
Standard Film thickness	60um dry film thickness (about 120um wet film thickness)
Theoretical spreading rate	6.67m²/Kg (60um dry film thickness)
Full cure	(23℃±2 )7d
Flash point	33℃

PRODUCT APPLICATION

ST-3 Rust Converter Marine Primer Paint 17

Substrate temperature shall be at 3 ℃ higher than dew point, relative humidity less than 80%. Measurement of temperature and humidity should be close to substrate.

ST-3 Rust Converter Marine Primer Paint 18

ST-3 Rust Converter Marine Primer Paint 19

ST-3 Rust Converter Marine Primer Paint 20

ST-3 Rust Converter Marine Primer Paint 21

TEST REPORT

ST-3 Rust Converter Marine Primer Paint 22

ST-3 Rust Converter Marine Primer Paint 23

ISO-90012015-standard

ST-3 Rust Converter Marine Primer Paint 24

RoHS

ST-3 Rust Converter Marine Primer Paint 25

Special paint CE certificate

ST-3 Rust Converter Marine Primer Paint 26

PU CE certificate

ST-3 Rust Converter Marine Primer Paint 27

Floor paint CE certificate

Certificate

ST-3 Rust Converter Marine Primer Paint 28

ST-3 Rust Converter Marine Primer Paint 29

Occupational Health And Safety Management System OHSAS 18001 New

ST-3 Rust Converter Marine Primer Paint 30

Environmental Management Syatem ISO14001 New

ST-3 Rust Converter Marine Primer Paint 31

SRC

ST-3 Rust Converter Marine Primer Paint 32

sgs1

ST-3 Rust Converter Marine Primer Paint 33

SASO1

CUSTOMER EVALUATION

ST-3 Rust Converter Marine Primer Paint 34

ST-3 Rust Converter Marine Primer Paint 35

SHOW CASE

ST-3 Rust Converter Marine Primer Paint 36

Dong Ying Olympics Sports Center

Products: Epoxy Sealing Agent + Epoxy Slurry Intermediate Layer+ Epoxy Self-leveling Floor Finish

ST-3 Rust Converter Marine Primer Paint 37

ST-3 Rust Converter Marine Primer Paint 38

———————————————————————————————————————————————————————————————————————————————————————————————————————————————————————

PT.Conch North Sulawesi Cement

Products: Epoxy Sealing Agent + Epoxy Slurry Intermediate Layer+ Epoxy Self-leveling Floor Finish

ST-3 Rust Converter Marine Primer Paint 39

ST-3 Rust Converter Marine Primer Paint 40

PT Sgmw Motors Indonesia-lingyun Workshop

Product: Self-leveling Epoxy Floor Paint

ST-3 Rust Converter Marine Primer Paint 41

ST-3 Rust Converter Marine Primer Paint 42

Get in touch with us

YMS Industrial paint suppliers core products, including anti corrosive paint, antirust paint, acid & alkali resisting paint, heat resisting paint, building & floor paint etc., help protect and extend substrate life for years.