loading

YMS paint manufacturers started in 2001, specialized in the production of customized  coatings. | YMS Paint the professional Industrial Paint Suppliers, Anti Corrosive Paint Manufacturer.

METAL PAINT

Oriented by technology, we serve customers worldwide not only our high quality products, but also technical consultation and engineering scenarios.

Home  > PRODUCTS  > Metal Protection Paint  > 

Epoxy Iron Oxide Red Anti-rust Paint

这里可以自定义设置
Epoxy Iron Oxide Red Anti-rust Paint
B站不支持收货地址
B站不支持库存规格
Flash Point:
38℃
Standard Film Thickness:
80um dry film thickness (about 145um wet film thickness)
Color:
Iron-red
Density:
~1.43Kg/L
Solid Volume:
(45±2 )%
Theoretical Spreading Rate:
3.9m²/Kg (80um dry film thickness)
参数暂无数据
多属性暂无数据
B站不支持优惠卷

Add success, do you want to check your shopping cart?

暂无分享
B站不支持产品保障
该产品后台详情无内容
这里可以自定义设置

PRODUCT DESCRIPTION

This product is based on aliphatic isocyanates and hydroxy resins, and has strong weather resistance. Meanwhile, the paint film is firm and glossy. Besides, it is a good choice for decoration as it won’t be powdered or get yellow easily. What’s more, its resistance to chemical and water is remarkable.

 

Typical Uses:

This product is commonly used as high-performance decorative coating for steel structure and aluminum alloy.
这里可以自定义设置
这里可以自定义设置

PRODUCT SELLING POINT

● Nanotechnology, compact structure.

 

● Salt spray corrosion resistance ≥3000h,Resistance to aging≥5000h.

 

● 98% concentrated sulfuric acid for 1200h. 

 

● Resistance to 30% hydrochloric acid for 1200h.

 

●Factory direct sale.

PRODUCT ADVANTAGES

这里可以自定义设置

PRODUCT APPLICATION GUIDE

Mixing

Use the power mixer to mix the main paint evenly, and then as you stir it, you add the hardener until you get to mix well.

Thinner

Polyurethane paint thinner

Mixing ratioPart A: Part B = 20:4(by weight)

Airless spray

Nozzle tip: 0.017~0.025inches

Spray pressure: 18~25Mpa

Thinner ratio:0~15% (by weight of paint)


Brush, Roller  

Recommended

Must achieve required thickness.


MORE SPECIFIC COLORS PLEASE CONSULT US

DRYING SCHEDULE 


Substrate Temperature

10 ℃

20 ℃

30 ℃

To touch(30um)

5h

2.5h

1.5h

To handle(30um)

24h

8h

4h

Min. recoating time24h8h4h
Max. recoating time---
Pot life
4h2h1h

* Make sure no chalking and other contaminations before recoating. If necessary, stucco thoroughly before coating.

* Above data for reference only, actual drying time and recoating time is dependent on temperature, dry film thickness, ventilation conditions, humidity, mechanical strength, etc.



PRODUCT SPECIFICATIONS

Color

Customized

Gloss

High gloss

Density

~1.25Kg/L(after mixing)

Hardness

Polyurethane paint thinner

Solid Volume

(50±2 )%

Standard Film thickness

60um dry film thickness  (about 120um wet film thickness)

Theoretical spreading rate

6.67m²/Kg (60um dry film thickness)

Full cure

(23℃±2 )7d

Flash point33℃
这里可以自定义设置

PRODUCT APPLICATION 

Substrate temperature shall be at 3 ℃ higher than dew point, relative humidity less than 80%. Measurement of temperature and humidity should be close to substrate.

这里可以自定义设置

TEST REPORT

Certificate

CUSTOMER EVALUATION

SHOW CASE

  1. 01

Dong Ying Olympics Sports Center

Products: Epoxy Sealing Agent + Epoxy Slurry Intermediate Layer+ Epoxy Self-leveling Floor Finish

———————————————————————————————————————————————————————————————————————————————————————————————————————————————————————

  1. 02

PT.Conch North Sulawesi Cement

Products: Epoxy Sealing Agent + Epoxy Slurry Intermediate Layer+ Epoxy Self-leveling Floor Finish

———————————————————————————————————————————————————————————————————————————————————————————————————————————————————————

03

PT Sgmw Motors Indonesia-lingyun Workshop

Product: Self-leveling Epoxy Floor Paint

社媒暂无评论
Chat Online 编辑模式下无法使用
Leave Your Message inputting...
We will get back to you asap