Oriented by technology, we serve customers worldwide not only our high quality products, but also technical consultation and engineering scenarios.
PRODUCT DESCRIPTION
Typical Uses:
Application Guide
● Mixing:
Ready to use.
● Thinner:
Clean water.
● Airless Spray:
● Spray, brush, roller:
Recommended
Must achieve required thickness.
Substrate temperature | 10 °C | 20 °C | 30 °C |
To touch (20μm) | 4h | 2h | 1.5h |
To handle (20μm) | 24h | 24h | 20h |
Min. recoating time | 24h | 24h | 20h |
Max. recoating time | / | / | / |
* Make sure no chalking and other contaminations before recoating. | |||
* Above data for reference only, actual drying time and recoating time is dependent on temperature, dry film thickness, ventilation conditions. |
SURFACE TREATMENT
The quality of the water slurry and concrete base to be painted shall conform to JGJ73-91 Code for Construction and Evaluation of Building Decoration. The surface of the base must be clean, dry and firm, free from oil or other dirt with its PI value less than 10. If there is remaining coating on the wall, the loose, peeling and powdered parts should be removed and polished with sandpaper. If there is mildew, wash it with hot water adding 25% bleaching agent, keep the water on the surface for 10min, then wash it thoroughly with clear water, dry it for 48hours before painting. The pitted surface and gap shall be repaired with our exclusive putty for architectural paint. The treated wall shall be painted as soon as possible to avoid re-pollution.
Advanced Architectural Latex Paint Sealing Primer: 1*20µm (dry film thickness)
Advanced Exterior Putty: 1~2mm (dry film thickness)
Natural Stone Textured Paint: According to the thickness of stone(dry film thickness)
SAFETY AND HEALTH
Please refer to MSDS before using this product. If you do not fully understand the restrictions, or cannot follow MSDS directions strictly, do not use this product. This volatile product is flammable. Keep this product away from flame or fire. Smoking is strictly prohibited in working area. Keep working area ventilated during application to make sure solvent vapor content is low in the air. PPE is necessary to avoid this product contacting with eyes or skin. More detailed safety tips are based on practical situation.
Please handle used paint barrel correctly to avoid any pollution.
Storage:
Store this product in shady, dry, and ventilated warehouse. Storage temperature should be above 0℃. The shelf life is 12 months at room temperature. If exceeding shelf life, the products shall be tested before using.
Disclaimer:
All technical data given in this document is based on our knowledge achieved in lab and practice, it is not completely correct. Although we try to keep the validity of our advice, however we cannot predict the practical conditions that will affect paint quality. Herein, we cannot be responsible for the consequences of variations in such conditions, or for unforeseen conditions. We reserve the right to modify this document without informing in advance.
Packaging | Packing size | Packing weight |
Part A | 20L | 30 KG |
Copyright © 2020 Changzhou IMS New Materials Technology Co., Ltd. | All Rights Reserved | XML
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.