Advanced Architectural Emulsion Sealing Primer
5.0
Theoretical Spreading Rate:
20m²/Kg (20um dry film thickness)
Full Cure:
(23±2℃ )7d
Color:
Milky white
Density:
~1.0Kg/L
Solid Volume:
(40±2 )%
Standard Film Thickness:
20um dry film thickness (about 50um wet film thickness)
design customization
Please fill out the form below to request a quote or to request more information about us. Please be sure to upload customized requirement documents or pictures, and we will get back to you as soon as possible with a response. we're ready to start working on your new project, contact us now to get started.
Please fill out the form below to request a quote or to request more information about us. please be as detailed as possible in your message, and we will get back to you as soon as possible with a response. we're ready to start working on your new project, contact us now to get started.
PRODUCT DESCRIPTION
Advanced Architectural Emulsion Sealing Primer is an exclusive sealing primer composed of acrylic copolymer emulsion and various additives. It has strong resistance to alkali and water. Besides, the paint has excellent permeability and adhesion to the substrate. What’s more, it is nontoxic and dries fast, very safe and easy for construction.
Typical Uses:
This product is not easily to be powdered so it can be used in outdoor environment for a long time. It is typically used on cement, concrete cement asbestos boards and other base materials. Using this sealing primer before applying the indoor or outdoor emulsion paint will greatly increase the coating’s adhesion to the substrate. Avoiding multiple coating methods can help to achieve the best color and gloss.
Application Guide
● Mixing:
Ready to use.
● Thinner:
Clean water.
● Airless Spray:
Nozzle tip: 0.017~0.023 inches
Spray pressure: 15~18Mpa
Thinner ratio: 0~10% (by weight of paint)
● Brush, roller:
Recommended
Must achieve required thickness.
DRYING SCHEDULE
Substrate temperature | 10 °C | 20 °C | 30 °C |
To touch (20μm) | 4h | 2h | 1.5h |
To handle (20μm) | 24h | 24h | 20h |
Min. recoating time | 24h | 24h | 20h |
Max. recoating time | / | / | / |
* Make sure no chalking and other contaminations before recoating. | |||
* Above data for reference only, actual drying time and recoating time is dependent on temperature, dry film thickness, ventilation conditions. | |||
SURFACE TREATMENT
The quality of the water slurry and concrete base to be painted shall conform to JGJ73-91 Code for Construction and Evaluation of Building Decoration. The surface of the base must be clean, dry and firm, free from oil or other dirt with its PI value less than 10. If there is remaining coating on the wall, the loose, peeling and powdered parts should be removed and polished with sandpaper. If there is mildew, wash it with hot water adding 25% bleaching agent, keep the
water on the surface for 10min, then wash it thoroughly with clear water, dry it for 48hours before painting. The pitted surface and gap shall be repaired with our exclusive putty for architectural paint. The treated wall shall be painted as soon as possible to avoid re-pollution.
APPLICATION
Application conditions: Substrate temperature shall be 3 ℃ higher than dew point, relative humidity less than 85%. Measurement of temperature and humidity should be close to the substrate.
CLASSICAL COATING SYSTEM
Please inquiry JIANBANG paint for specific coating solutions.
Advanced Architectural Latex Paint Sealing Primer: 1*20µm (dry film thickness)
Advanced Exterior Putty: 1～2mm (dry film thickness)
Natural Stone Textured Paint: According to the thickness of stone(dry film thickness)
SAFETY AND HEALTH
Please refer to MSDS before using this product. If you do not fully understand the restrictions, or cannot follow MSDS directions strictly, do not use this product. This product, as a waterborne paint, has low VOC
volatilization.Therefore, is environmental friendly and safe to use. PPE is necessary to avoid this product contacting with eyes or skin. More detailed safety tips are based on practical situation.
Please handle used paint barrel correctly to avoid any pollution.
Storage:
Store this product in shady, dry, and ventilated warehouse away from heat. This paint shall be stored in temperature above 0℃ and its shelf life is 12 months at room temperature. If exceeding shelf life, the products shall be tested before using.
Disclaimer:
All technical data given in this document is based on our knowledge achieved in lab and practice, it is not completely correct. Although we try to keep the validity of our advice, however we cannot predict the practical conditions that will affect paint quality. Herein, we cannot be responsible for the consequences of variations in such conditions, or for unforeseen conditions. We reserve the right to modify this document without informing in advance.
Packaging | Packing size | Packing weight |
Part A | 20L | 20 KG |
CE Certificate
Environmental Management Syatem ISO14001 New
Occupational Health And Safety Management System OHSAS 18001 New
Quality Management System ISO 9001 New
ROHS Report
SASO1
sgs1
sgs2
SRC
{{item.score}} Stars
{{item.pre}}%
{{item.nickname ? (item.nickname.slice(0, 2) + '*****') : item.source === 1 ? 'mall buyer' : '--'}}
{{item.comment_time}}
Review in the {{item.country}}
{{itemAttr.params_key}}: {{itemAttr.params_value}}
Get in touch with us
YMS Industrial paint suppliers core products, including anti corrosive paint, antirust paint, acid & alkali resisting paint, heat resisting paint, building & floor paint etc., help protect and extend substrate life for years.
Related Products
no data
Our fundamental product range, which encompasses rust-resistant industrial paints, paints with acid and alkali resistance, high-temperature-resistant paints, building and floor paints, and so on, aids in safeguarding the substrates while prolonging their lifespan for several years to come.
Shortcut links
Product
Contact with us
Tel: 0086-17312895118
Email: inquiry@jsbj88.com
Fax: +86-519-85506198
Address:
No.2 Building 12, Hengsheng Technology Park II, No.8, Beitanghe Road, anning District, Changzhou, Jiangsu, China