Oriented by technology, we serve customers worldwide not only our high quality products, but also technical consultation and engineering scenarios.
Mixing | Ready to use |
Thinner | Clean water |
Airless spray | Nozzle tip:0.017~0.023 inch Spray pressure:15~18 MPa Thinner ratio:0~10% (by weight of paint) |
Brush、Roller | Recommended Must achieve required thickness |
Substrate Temperature | 10 ℃ | 20 ℃ | 30 ℃ |
To touch(30um) | 4h | 1h | 40min |
To handle(30um) | 24h | 24h | 20h |
Min. recoating time | 24h | 1h | 40min |
Max. recoating time | - | - | - |
* Make sure no chalking and other contaminations before recoating.
* Above data for reference only, actual drying time and recoating time is dependent on temperature, dry film thickness, ventilation conditions,humidity, mechanical strength, etc.
Color | Customized |
Gloss | Glossy |
Density | -1.25Kg/L |
Solid Volume | (35±2 )% |
Standard Film thickness | 60µm dry film thickness (about 171µm wet film thickness) |
Theoretical spreading rate | 4.67m²/Kg(60µm dry film thickness) |
Full cure | (23±2℃) 7d |
Copyright © 2020 Changzhou IMS New Materials Technology Co., Ltd. | All Rights Reserved | XML
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.