Alkyd Vanish

这里可以自定义设置

PRODUCT DESCRIPTION

This product is composed of medium oil alkyd resin modified by dry vegetable oil, drier, special additive and mixed solvent, etc. Significantly, it is provided with strong adhesion, water resistance and bright color. Besides, this clear coating is cured at room temperature and it also can be dried at low temperature.

Typical Uses:

This paint is used as the vanish for indoor and outdoor metal and wood surface. Meanwhile, it is designed to decorate and protect the furniture and commodities.

这里可以自定义设置

PRODUCT SELLING POINT

● The epoxy floor paint is mainly prepared by epoxy resin, curing agent, dispersant and aggregates depend on requirements.

● Main advantages of this paint are great resistance of slippery, electrostatic, acid and alkali.

● Moreover, it also has good resistance to organic solvent, heavy load and abrasion.

● Besides, it combines incredible hardness and bonding power to provide a heavy duty and to be used as topcoat.

PRODUCT ADVANTAGES

Extend the service life by 2-3 years

Resistance (chemical medium) 98% sulfuric acid, 30% hydrochloric acid carefree

Five years bright as new, 5.99% Improve the yield of sensitive devices by 99%

50% Avoid slips and increase safety by 50%

这里可以自定义设置

PRODUCT PARAMETER

Mixingv	Ready to use
Airless spray	Nozzle tip: 0.017~0.023 inches Spray pressure: 15~18Mpa Thinner ratio: 0~15% (by weight of paint)
Brush, Roller	Recommended Must achieve required thickness

MORE SPECIFIC COLORS PLEASE CONSULT US

DRYING SCHEDULE

Substrate Temperature	10 ℃	20 ℃	30 ℃
To touch(30um)	2h	1h	30min
To handle(30um)	8h	4h	3h
Min. recoating time	8h	4h	3h
Max. recoating time	-	-	-

* Make sure no chalking and other contaminations before recoating

* Above data for reference only, actual drying time and recoating time is dependent on temperature, dry film thickness, ventilation conditions

PRODUCT SPECIFICATIONS

Color	Transparent
Gloss	Glossy
Density	~0.95Kg/L(after mixing)
Solid Volume	(30±2 )%
Standard Film thickness	30um dry film thickness (about 100um wet film thickness)
Theoretical spreading rate	30um dry film thickness (about 100um wet film thickness)
Full cure	(23±2℃)24h
Flash Point	35℃

这里可以自定义设置

PRODUCT APPLICATION

Substrate temperature shall be at 3 ℃ higher than dew point, relative humidity less than 85%. Measurement of temperature and humidity should be close to substrate.