Oriented by technology, we serve customers worldwide not only our high quality products, but also technical consultation and engineering scenarios.
PRODUCT SELLING POINT
● Nanotechnology, compact structure.
● Salt spray corrosion resistance ≥3000h,Resistance to aging≥5000h.
● 98% concentrated sulfuric acid for 1200h.
● Resistance to 30% hydrochloric acid for 1200h.
●Factory direct sale.
Ready to use
Nozzle tip: 0.017~0.023 inches
Spray pressure: 15~18Mpa
Thinner ratio: 0~10% (by weight of paint)
Must achieve required thickness.
Min. recoating time
* Make sure no chalking and other contaminations before recoating. If necessary, stucco thoroughly before coating.
* Above data for reference only, actual drying time and recoating time is dependent on temperature, dry film thickness, ventilation conditions, humidity, mechanical strength, etc.
Standard Film thickness
80um dry film thickness (about 177um wet film thickness)
Theoretical spreading rate
4.68m²/Kg (40um dry film thickness)
Substrate temperature shall be 3 ℃ higher than dew point. Measurement of temperature should be conducted close to substrate.
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.