Anti-static Epoxy Floor Paint

这里可以自定义设置

PRODUCT DESCRIPTION

This product is a high solid two-component paint which is composed of modified epoxy resin, conductive metal powder, elastic polyamide curing agent, etc. In addition, this paint also needs to add wear-resisting fillers before use. Meanwhile, the paint film has excellent oil resistance, corrosion resistance, wear resistance and long-lasting anti-static effect.

Typical Uses:

It is designed for walls, floors and storage tanks of the anti-static factories such as the electronic, microelectronic, communication and computer. Besides, the types of foregoing factories also include precision instrument, textile, printing, powder, etc.

这里可以自定义设置

PRODUCT SELLING POINT

● The epoxy floor paint is mainly prepared by epoxy resin, curing agent, dispersant and aggregates depend on requirements.

● Main advantages of this paint are great resistance of slippery, electrostatic, acid and alkali.

● Moreover, it also has good resistance to organic solvent, heavy load and abrasion.

● Besides, it combines incredible hardness and bonding power to provide a heavy duty and to be used as topcoat.

PRODUCT ADVANTAGES

Extend the service life by 2-3 years

Resistance (chemical medium) 98% sulfuric acid, 30% hydrochloric acid carefree

Five years bright as new, 5.99% Improve the yield of sensitive devices by 99%

50% Avoid slips and increase safety by 50%

这里可以自定义设置

PRODUCT PARAMETER

Mixingv	Use the power mixer to mix the main paint evenly, and then as you stir it, you add the hardener until you get to mix well. Generally, if the temperature is below 10 ℃, it needs 20 min induction time; If the temperature is over 10 ℃, it needs 15 min induction time.
Mixing ratio	Part A: Part B= 20:5(by weight)
Thinner	Exclusive thinner
Airless spray	Nozzle tip: 0.017~0.023 inches Spray pressure: 15~18 MPa Thinner ratio: 0~15% (by weight of paint)
Brush、Roller	Spray pressure: 15~18 MPa Thinner ratio: 0~15% (by weight of paint)

MORE SPECIFIC COLORS PLEASE CONSULT US

DRYING SCHEDULE

Substrate Temperature	10 ℃	20 ℃	30 ℃
To touch	8h	4h	3h
To handle	48h	24h	24h
Min. recoating time	8h	4h	3h
Max. recoating time	-	-	-
Pot life	1.5h	1h	0.5h

* Make sure no chalking and other contaminations before recoating

* Above data for reference only, actual drying time and recoating time is dependent on temperature, dry film thickness, ventilation conditions

PRODUCT SPECIFICATIONS

Color	Customized
Gloss	Glossy
Density	~1.3 Kg/L(after mixing)
Hardness	Epoxy paint curing agent
Solid volume	(50±2) %
Film thickness	100µm dry film thickness (about 200µm wet film thickness)
Theoretical spreading rate	3.8m²/Kg (100µm dry film thickness)
Full Cure (23±2℃)	(23±2℃) 7~15d
Flash Point	31℃

这里可以自定义设置

PRODUCT APPLICATION

Substrate temperature shall be at 3 ℃ higher than dew point, relative humidity less than 85%. Measurement of temperature and humidity should be close to substrate.