Architectural Elastic Putty With Great Elasticity And Strong Adhesion...

这里可以自定义设置

PRODUCT DESCRIPTION

This product is composed of the imported elastic acrylic copolymer emulsion, pigments, fillers and various auxiliaries. It has the main advantages of great elasticity and strong adhesion. Besides, this product is resistant to water, alkali and weather. What’s more, it is waterproof, mildew proof, simple and nontoxic.

Typical Uses:

This product is typically used to fix the fissures and connect interface on inner or outer walls and ceilings made of various materials such as concrete, plasterboard, cement, etc.

这里可以自定义设置

PRODUCT SELLING POINT

● Nanotechnology, compact structure.

● The coating structure is designed independently.

● Import of 80% raw materials.

● Qualified for export of hazardous chemicals.

● Performance and color optimization customization.

PRODUCT ADVANTAGES

Provide construction plan and construction service

Performance and color optimization customization

The contract is guaranteed for 20 years

Qualified for export of hazardous chemicals

这里可以自定义设置

PRODUCT APPLICATION GUIDE

Mixin	Ready to use
Airless spray	Not recommende
Brush、Roller	Not recommende
Scraper	Recommende

MORE SPECIFIC COLORS PLEASE CONSULT US

DRYING SCHEDULE

Substrate Temperature	10 ℃	20 ℃	30 ℃
To touch(1mm)	8h	4h	3h
To handle(1mm)	36h	24h	20h
Min. recoating time	36h	24h	20h
Max. recoating time	-	-	-

* Make sure no chalking and other contaminations before recoating.

* Above data for reference only, actual drying time and recoating time is dependent on temperature, dry film thickness, ventilation conditions, humidity, mechanical strength, etc.

PRODUCT SPECIFICATIONS

Color	Light yellow
Gloss	Glossy
Density	~1.2Kg/L
Solid Volume	(65±2 )%
Standard Film thickness	1mm dry film thickness (about 1.54mm wet film thickness)
Theoretical spreading rate	0.54m²/Kg (1mm dry film thickness)
Full cure	(23±2℃ )7d

这里可以自定义设置

Substrate temperature shall be 3 ℃ higher than dew point, relative humidity less than 85%. Measurement of temperature and humidity should be close to the substrate.