Oriented by technology, we serve customers worldwide not only our high quality products, but also technical consultation and engineering scenarios.
PRODUCT SELLING POINT
● Environmental friendly and easy to apply
● Salt spray corrosion resistance ≥3000h,Resistance to aging≥5000h.
● 98% concentrated sulfuric acid for 1200h.
● Resistance to 30% hydrochloric acid for 1200h.
● It won’t be powdered or get yellow easily
Use the power mixer to mix the main paint evenly, and then as you stir it, you add the hardener until you get to mix well.
Polyurethane paint thinner
Nozzle tip: 0.017~0.025inches
Spray pressure: 18~25Mpa
Thinner ratio:0~15% (by weight of paint)
Must achieve required thickness.
|Min. recoating time||24h||8h||4h|
|Max. recoating time||-||-||-|
* Make sure no chalking and other contaminations before recoating.
* Above data for reference only, actual drying time and recoating time is dependent on temperature, dry film thickness, ventilation conditions, humidity, mechanical strength, etc.
Standard Film thickness
60um dry film thickness (about 120um wet film thickness)
Theoretical spreading rate
6.67m²/Kg (40um dry film thickness)
Substrate temperature shall be at 3 ℃ higher than dew point, relative humidity less than 85%. Measurement of temperature and humidity should be close to substrate.
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.