YMS PAINT Over 20 years experience in the production of customized industrial paint coatings

Chlorinated Rubber Anti-rust Paint

Theoretical Spreading Rate:

0.4Kg/m² (60µm dry film thickness)

Color:

Customized

Density:

1.4Kg/L(after mixing)

Solid Volume:

50%

Mature Life, Min@23±2℃:

10-15min

Pot Life, Hours@23±2℃ :

Inquiry

Write a Review

PRODUCT DESCRIPTION

Chlorinated Rubber Anti-rust Paint 4

This rust-resistant paint, based on chlorinated rubber resin, has excellent performance in adhesion to steel, corrosion-resistance, and low-temperature construction property. Moreover, its film is free from saponification.

Typical Uses:

This product can be applied as rust-resistant primer for ship bottom, steel structure below waterline in various environment.

PRODUCT SELLING POINT

Chlorinated Rubber Anti-rust Paint 7

● The epoxy floor paint is mainly prepared by epoxy resin, curing agent, dispersant and aggregates depend on requirements.

● Main advantages of this paint are great resistance of slippery, electrostatic, acid and alkali.

● Moreover, it also has good resistance to organic solvent, heavy load and abrasion.

● Besides, it combines incredible hardness and bonding power to provide a heavy duty and to be used as topcoat.

PRODUCT ADVANTAGES

Chlorinated Rubber Anti-rust Paint 8

Extend the service life by 2-3 years

Resistance (chemical medium) 98% sulfuric acid, 30% hydrochloric acid carefree

Five years bright as new, 5.99% Improve the yield of sensitive devices by 99%

50% Avoid slips and increase safety by 50%

PRODUCT PARAMETER

Chlorinated Rubber Anti-rust Paint 13

Mixingv	Ready to use
Thinner	Chlorinated rubber thinner
Airless spray	Nozzle tip: 0.018~0.025 inches Spray pressure: 18~25Mpa Thinner ratio: 5~15% (by weight of paint)
Brush, Roller	Recommended Must achieve required thickness

MORE SPECIFIC COLORS PLEASE CONSULT US

Chlorinated Rubber Anti-rust Paint 14

DRYING SCHEDULE

Chlorinated Rubber Anti-rust Paint 16

Substrate Temperature	10 ℃	20 ℃	30 ℃
To touch(50um)	3h	2h	1h
To handle(50um)	48h	24h	12h
Min. recoating time	12h	6h	3h

* Make sure no chalking and other contaminations before recoating

* Above data for reference only, actual drying time and recoating time is dependent on temperature, dry film thickness, ventilation conditions

PRODUCT SPECIFICATIONS

Chlorinated Rubber Anti-rust Paint 17

Color	Customized
Gloss	Semi-gloss
Density	~1.4Kg/L
Solid Volume	(42±2 )%
Standard Film thickness	100um dry film thickness (about 238um wet film thickness)
Theoretical spreading rate	3m²/Kg (100um dry film thickness)
Flash Point	31 ℃

PRODUCT APPLICATION

Chlorinated Rubber Anti-rust Paint 18

Substrate temperature shall be at 3 ℃ higher than dew point, relative humidity less than 85%. Measurement of temperature and humidity should be close to substrate.

TEST REPORT

Chlorinated Rubber Anti-rust Paint 25

ISO-90012015-standard

RoHS

Special paint CE certificate

PU CE certificate

Floor paint CE certificate

Certificate

Chlorinated Rubber Anti-rust Paint 31

Occupational Health And Safety Management System OHSAS 18001 New

Environmental Management Syatem ISO14001 New

SRC

sgs1

SASO1

CUSTOMER EVALUATION

Chlorinated Rubber Anti-rust Paint 37

SHOW CASE

Chlorinated Rubber Anti-rust Paint 39

Dong Ying Olympics Sports Center

Products: Epoxy Sealing Agent + Epoxy Slurry Intermediate Layer+ Epoxy Self-leveling Floor Finish

———————————————————————————————————————————————————————————————————————————————————————————————————————————————————————

PT.Conch North Sulawesi Cement

Products: Epoxy Sealing Agent + Epoxy Slurry Intermediate Layer+ Epoxy Self-leveling Floor Finish

PT Sgmw Motors Indonesia-lingyun Workshop

Product: Self-leveling Epoxy Floor Paint

Get in touch with us

YMS Industrial paint suppliers core products, including anti corrosive paint, antirust paint, acid & alkali resisting paint, heat resisting paint, building & floor paint etc., help protect and extend substrate life for years.