Custom Advanced Interior Wall Inorganic Paint Factory From...

这里可以自定义设置

PRODUCT DESCRIPTION

The product is composed of acrylic copolymer emulsion, high quality pigment and a variety of additives. Meanwhile, it has excellent resistance to alkali, water, washing and mildew. Besides, this coating has the advantages of strong adhesion, simple construction, quick drying, non-toxicity, etc.

Typical Uses:

The product is designed for substrate surface such as the concrete, cement mortar and plaster. Besides, it is also suitable for the interior decoration of civil residential buildings and public buildings.

这里可以自定义设置

PRODUCT SELLING POINT

● Nanotechnology, compact structure.

● The coating structure is designed independently.

● Import of 80% raw materials.

● Qualified for export of hazardous chemicals.

● Performance and color optimization customization.

PRODUCT ADVANTAGES

Provide construction plan and construction service

Performance and color optimization customization

The contract is guaranteed for 20 years

Qualified for export of hazardous chemicals

这里可以自定义设置

PRODUCT APPLICATION GUIDE

Mixing

Ready to use

Airless spray

Nozzle tip：0.017~0.023 inch

Spray pressure：15~18 MPa

Thinner ratio：0~10% (by weight of paint)

Brush、Roller

Recommended

Must achieve required thickness

MORE SPECIFIC COLORS PLEASE CONSULT US

DRYING SCHEDULE

Substrate Temperature	10 ℃	20 ℃	30 ℃
To touch(30um)	4h	1h	40min
To handle(30um)	24h	12h	6h
Min. recoating time	24h	12h	3h
Max. recoating time	-	-	-

* Make sure no chalking and other contaminations before recoating.

* Above data for reference only, actual drying time and recoating time is dependent on temperature, dry film thickness, ventilation conditions.

PRODUCT SPECIFICATIONS

Color	Customized
Gloss	Flat
Density	1.3Kg/L
Solid Volume	(37±2 )% (Based on data measured for white or light colored latex coatings)
Film thickness	60µm dry film thickness (about 162µm wet film thickness)
Theoretical spreading rate	4.7m²/Kg(60µm dry film thickness,contains no loss)
The drying time	(23±2℃) 45min

这里可以自定义设置

Substrate temperature shall be 3 ℃ higher than dew point, relative humidity less than 85%. Measurement of temperature and humidity should be close to the substrate.