Customized Acrylic Polyurethane Finish can be matched with most epoxy resin-based paint
PRODUCT DESCRIPTION
Typical Uses:
PRODUCT SELLING POINT
● Nanotechnology, compact structure.
● Salt spray corrosion resistance ≥3000h,Resistance to aging≥5000h.
● 98% concentrated sulfuric acid for 1200h.
● Resistance to 30% hydrochloric acid for 1200h.
●Factory direct sale.
PRODUCT ADVANTAGES
PRODUCT APPLICATION GUIDE
| Mixing | Use the power mixer to mix the main paint evenly, and then as you stir it, add the hardener until you get to mix well. |
| Thinner | Clean water |
Mixing ratio | Part A: Part B = 20:5 |
Airless spray | Nozzle tip: 0.017~0.023 inches Spray pressure: 15~18Mpa Thinner ratio: 0~10% (by weight of paint) |
Brush, Roller | Recommended Must achieve required thickness. |
MORE SPECIFIC COLORS PLEASE CONSULT US
DRYING SCHEDULE
| Substrate Temperature | 10 ℃ | 20 ℃ | 30 ℃ |
To touch(30um) | 4h | 2h | 1.5h |
To handle(30um) | 24h | 24h | 20h |
Min. recoating time | 24h | 24h | 20h |
| Pot life | 4h | 2h | 1h |
* Make sure no chalking and other contaminations before recoating. If necessary, stucco thoroughly before coating.
* Above data for reference only, actual drying time and recoating time is dependent on temperature, dry film thickness, ventilation conditions, humidity, mechanical strength, etc.
PRODUCT SPECIFICATIONS
Color | Customized |
Gloss | Flat, High gloss, Matt |
Density | ~1.2Kg/L |
Solid Volume | (35±2 )% |
Standard Film thickness | 60um dry film thickness (about 171um wet film thickness) |
Theoretical spreading rate | 4.86m²/Kg (60um dry film thickness) |
Adhesion | Level 1 |
PRODUCT APPLICATION
Substrate temperature shall be 3 ℃ higher than dew point. Measurement of temperature should be conducted close to substrate.
TEST REPORT
Certificate
CUSTOMER EVALUATION
SHOW CASE
- 01
Dong Ying Olympics Sports Center
Products: Epoxy Sealing Agent + Epoxy Slurry Intermediate Layer+ Epoxy Self-leveling Floor Finish
———————————————————————————————————————————————————————————————————————————————————————————————————————————————————————
- 02
PT.Conch North Sulawesi Cement
Products: Epoxy Sealing Agent + Epoxy Slurry Intermediate Layer+ Epoxy Self-leveling Floor Finish
———————————————————————————————————————————————————————————————————————————————————————————————————————————————————————
03
PT Sgmw Motors Indonesia-lingyun Workshop
Product: Self-leveling Epoxy Floor Paint