Customized Acrylic Polyurethane Finish Can Be Matched With...

这里可以自定义设置

PRODUCT DESCRIPTION

Acrylic polyurethane finish is a two-component high gloss finish based on aliphatic isocyanates and hydroxyl resins. Its strong weather resistance makes it able to retain its gloss and color against severe weather conditions. Furthermore, it also has the advantages of strong adhesion, anti-corrosion, rust resistance. What’s more, it is able to be re-coated for a long time.

Typical Uses:

This product, as coating for newly-constructed facilities and for their maintenance, can be matched with most epoxy resin-based paints in various environmental conditions, including marine environment, chemical and petrochemical environment. Besides, it is also suitable for the electric power industry, paper industry, vehicle, ships and so on. The traditional spraying method is recommended to obtain the best luster and appearance.

这里可以自定义设置

Application Guide

● Mixing:

Use the power mixer to mix the main paint evenly, and then add the hardener and stir until it is well mixed.

● Mixing Ratio:

Part A: Part B= 20:4 (by weight)

● Thinner:

Acrylic polyurethane thinner

● Airless Spray:

Nozzle tip: 0.017~0.023 inches

Spray pressure: 15~18Mpa

Thinner ratio: 0~15% (by weight of paint)

● Brush, Roller:

Recommended

Must achieve required thickness.

DRYING SCHEDULE

Substrate temperature	10 °C	20 °C	30 °C
To touch (30μm)	5h	2.5h	1.5h
To handle (30μm)	20h	8h	4h
Min. recoating time	20h	8h	4h
Max. recoating time	4h	2h	1h
Pot life	4h	2h	1h
* Make sure no chalking and other contaminations before recoating.
* Above data for reference only, actual drying time and recoating time is dependent on temperature, dry film thickness, ventilation condition.

这里可以自定义设置

SURFACE TREATMENT

All surface to be coated shall be clean and dry. The surface shall be evaluated and treated according to ISO8504 standard.

Surface painted coatings: apply only to clean, dry and good compatible primer.

APPLICATION

Application conditions: Substrate temperature shall be at 3 ℃ higher than dew point, relative humidity less than 80%. Measurement of temperature and humidity should be close to substrate.

这里可以自定义设置

CLASSICAL COATING SYSTEM

Please inquiry JIANBANG Paint for specific coating solutions.

Epoxy Anti-corrosion Rust Tolerant Primer: 2*40µm (dry film thickness)

.Service 01

Epoxy Mica Iron Oxide Intermediate Paint: 2*40µm (dry film thickness)

.Service 01

Epoxy Anti-corrosion Finish: 2*50µm (dry film thickness)

这里可以自定义设置

SAFETY AND HEALTH

Please refer to MSDS before using this product. If you do not fully understand the restrictions, or cannot follow MSDS directions strictly, do not use this product. This volatile product is flammable. Keep this product away from flame or fire. Smoking is strictly prohibited in working area. Keep working area ventilated during application to make sure solvent vapor content is low in the air. PPE is necessary to avoid this product contacting with eyes or skin. More detailed safety tips are based on practical situation.

Please handle used paint barrel correctly to avoid any pollution.

Storage:

Store this product in shady, dry, and ventilated warehouse. The shelf life is 12 months at room temperature. If exceeding shelf life, the products shall be tested before using.

Disclaimer:

All technical data given in this document is based on our knowledge achieved in lab and practice, it is not completely correct. Although we try to keep the validity of our advice, however we cannot predict the practical conditions that will affect paint quality. Herein, we cannot be responsible for the consequences of variations in such conditions, or for unforeseen conditions. We reserve the right to modify this document without informing in advance.