High-performance Anti-corrosive Waterborne Alkyd Finish Paint...

这里可以自定义设置

PRODUCT DESCRIPTION

This one component product is mainly composed of waterborne acrylic modified alkyd resin by adding titanium dioxide, waterborne auxiliaries, water etc. The essential characteristics of this paint are non-toxicity, strong adhesion and great weather ability.

Typical Uses:

This product is a high-performance anti-corrosive finish which is typically designed for the surface of concrete and steel. Also, it is suitable for anti-corrosive engineering of mechanical equipment, workshop, guardrail, etc.

这里可以自定义设置

PRODUCT SELLING POINT

● Nanotechnology, compact structure.

● Salt spray corrosion resistance ≥3000h,Resistance to aging≥5000h.

● 98% concentrated sulfuric acid for 1200h.

● Resistance to 30% hydrochloric acid for 1200h.

●Factory direct sale.

PRODUCT ADVANTAGES

Repair rate 0, no downtime cost.Acceptance of all.

Extend the preservative time by 2.5 times.

Qualified for export of hazardous chemicals.

Save 250% maintenance cost.

这里可以自定义设置

PRODUCT APPLICATION GUIDE

Mixing	Ready to use
Thinner	Clean water
Thinner ratio	Add 10% water by weight of paint, or make adjustment according to specific condition but maximum should not exceed 20%.
Airless spray	Nozzle tip: 0.017~0.023 inches Spray pressure: 15~18Mpa
Spray viscosity	60-80 secs.
Brush viscosity	70-100 secs. (viscosity cup 4, 23±2℃)
Brush, Roller	Use soft wool brush or roller. Recommended Must achieve required thickness.

MORE SPECIFIC COLORS PLEASE CONSULT US

DRYING SCHEDULE

Substrate Temperature	10 ℃	20 ℃	30 ℃
To touch(30um)	6h	4h	1.5h
To handle(30um)	24h	24h	20h
Min. recoating time	24h	24h	20h

* Make sure no chalking and other contaminations before recoating. If necessary, stucco thoroughly before coating.

* Above data for reference only, actual drying time and recoating time is dependent on temperature, dry film thickness, ventilation conditions, humidity, mechanical strength, etc.

PRODUCT SPECIFICATIONS

Color	Customized
Gloss	Flat, High Gloss, Matte
Density	~1.25Kg/L
Solid Volume	(43±2 )%
Standard Film thickness	60um dry film thickness (about 140um wet film thickness)
Theoretical spreading rate	5.7m²/Kg (60um dry film thickness)
Adhesion	Level 1