High Quality Alkyd Resin Mica Iron Oxide Intermediate Paint

这里可以自定义设置

PRODUCT DESCRIPTION

This product is a anti-rust paint composed of oil-neutral dry vegetable oil modified alkyd resin. In addition, it contains no lead, non-toxic, good adhesion and nitro resistance.

Typical Uses:

This product can be used in light or medium corrosive environment with alkyd paint as the internal and external surface of steel and wood structure.

这里可以自定义设置

Application Guide

● Mixing:

Ready to use

● Thinner:

Alkyd thinner.

● Airless Spray:

Nozzle tip: 0.017~0.023 inches.

Spray pressure: 15~18 MPa.

Thinner ratio: 5~15% (by weight of paint).

● Brush, Roller:

Recommended for small areas only.

Must achieve required thickness.

DRYING SCHEDULE

Substrate temperature	10 °C	20 °C	30 °C
To touch (40μm)	5h	1h	30min
To handle (40μm)	48h	24h	12h
Min. recoating time	36h	24h	12h
* Make sure no chalking and other contaminations before recoating.
* Above data for reference only, actual drying time and recoating time is dependent on temperature, dry film thickness, ventilation condition.

这里可以自定义设置

SURFACE TREATMENT

All surface to be coated shall be clean and dry. The surface shall be evaluated and treated according to ISO8504 standard.

Steel: Sanding to Sa2.5 (ISO8501-1:2007). It is acceptable to polish by power tools to meet at least St2.0(ISO8501-1:2007).

Steel painted workshop primer: clean, dry and approved workshop primer.

Surface painted coatings: apply only to clean, dry and good compatible primer.

APPLICATION

Application conditions: Substrate temperature shall be at 3℃ higher than dew point, relative humidity less than 85%. Measurement of temperature and humidity should be close to substrate.

这里可以自定义设置

CLASSICAL COATING SYSTEM

Please inquiry JIANBANG Paint for specific coating solutions.

Alkyd Iron Red Anti-rust Paint: 2*40µm (dry film thickness)

Alkyd Mica Ferric Oxide Paint: 2*40µm (dry film thickness)

Alkyd Enamel: 2*35um (dry film thickness)

这里可以自定义设置

SAFETY AND HEALTH

Please refer to MSDS before using this product. If you do not fully understand the restrictions, or cannot follow MSDS directions strictly, do not use this product. This volatile product is flammable. Keep this product away from flame or fire. Smoking is strictly prohibited in working area. Keep working area ventilated during application to make sure solvent vapor content is low in the air. PPE is necessary to avoid this product contacting with eyes or skin. More detailed safety tips are based on practical situation.

Please handle used paint barrel correctly to avoid any pollution.

Storage:

Store this product in shady, dry, and ventilated warehouse. The shelf life is 12 months at room temperature. If exceeding shelf life, the products shall be tested before using.

Disclaimer:

All technical data given in this document is based on our knowledge achieved in lab and practice, it is not completely correct. Although we try to keep the validity of our advice, however we cannot predict the practical conditions that will affect paint quality. Herein, we cannot be responsible for the consequences of variations in such conditions, or for unforeseen conditions. We reserve the right to modify this document without informing in advance.