High Quality Fluorocarbon Coating Paint For Steel And Metal...

这里可以自定义设置

PRODUCT DESCRIPTION

This one-component product, mainly composed of waterborne fluorocarbon resin with excellent performance. It is environmental friendly and easy to apply. In addition, it is provided with special performance in weather fastness, durability, cleanness, color and light retention.

Typical Uses:

This product is typically designed for various exterior walls and roofs of architectures. Furthermore, it can also be used to durably protect and decorate different kinds of building materials, and this paint can greatly extend the service span of buildings.

这里可以自定义设置

PRODUCT SELLING POINT

● Environmental friendly and easy to apply

● Salt spray corrosion resistance ≥3000h,Resistance to aging≥5000h.

● 98% concentrated sulfuric acid for 1200h.

● Resistance to 30% hydrochloric acid for 1200h.

● Special performance in weather fastness, durability, cleanness, color and light retention

PRODUCT ADVANTAGES

Repair rate 0, no downtime cost.Acceptance of all.

Extend the preservative time by 2.5 times.

Qualified for export of hazardous chemicals.

Performance and color optimization customization

这里可以自定义设置

PRODUCT APPLICATION GUIDE

Mixing

Ready to use

Thinner

Clean water

Airless spray

Nozzle tip: 0.017~0.023inches

Spray pressure: 15~18Mpa

Thinner ratio:0~10% (by weight of paint)

Brush, Roller

Recommended

Must achieve required thickness.

MORE SPECIFIC COLORS PLEASE CONSULT US

DRYING SCHEDULE

Substrate Temperature	10 ℃	20 ℃	30 ℃
To touch(40um)	5h	2.5h	1.5h
To handle(30um)	20h	8h	4h
Min. recoating time	20h	8h	4h

* Make sure no chalking and other contaminations before recoating.If necessary, stucco thoroughly before coating.

* Above data for reference only, actual drying time and recoating time is dependent on temperature, dry film thickness, ventilation conditions, humidity, mechanical strength, etc.

PRODUCT SPECIFICATIONS

Color	Customized
Gloss	Flat,Matt
Density	~1.2Kg/L
Solid Volume	(45±2 )%
Standard Film thickness	80um dry film thickness (about 177um wet film thickness)
Theoretical spreading rate	4.68m²/Kg (40um dry film thickness)
Full cure	48h

这里可以自定义设置

PRODUCT APPLICATION

Substrate temperature shall be at 3 ℃ higher than dew point, relative humidity less than 85%. Measurement of temperature and humidity should be close to substrate.