Inorganic Heat-resistant Primer Used As Compatible Primer Of Heat-resistant
PRODUCT DESCRIPTION
Typical Uses:
Application Guide
● Mixing:
● Thinner:
Exclusive thinner for Inorganic Heat-resistant Paint
● Airless Spray:
Nozzle tip: 0.025~0.031 inches.
Spray pressure: 18~28 MPa.
Thinner ratio: 5~15% (by weight of paint).
● Brush, Roller:
Recommended for small areas only.
Must achieve required thickness.
● Roller coater:
Not recommended.
DRYING SCHEDULE
Substrate temperature | 10 °C | 20 °C | 30 °C |
To touch (30um) | 1h | 0.5h | 0.2h |
To handle (30um) | 24h | 12h | 6h |
Min. recoating time | 8h | 4h | 2h |
| Max. recoating time | 5d | 3d | 2d |
Use time after mixing | 4h | 2h | 1h |
* Make sure no chalking and other contaminations before recoating. | |||
* Above data for reference only, actual drying time and recoating time is dependent on temperature, dry film thickness, ventilation condition, humidity, mechanical strength,etc. | |||
SURFACE TREATMENT
The surface to be coated shall be clean, dry and free from contaminations. Also, the surface shall be evaluated and handled according to ISO8504 standard.
Bare steel: sandblasting to Sa2.5(IOS8501-1:2007). For the non-soaking site, acceptable for power tool grinding, but at least reach St2(IOS8501-1:2007).
APPLICATION
Application conditions: Substrate temperature shall be 3 ℃ higher than dew point with relative humidity below 85%. Measurement of temperature and humidity should be conducted close to substrate.
CLASSICAL COATING SYSTEM
Please inquiry JIANBANG Paint for specific coating solutions.
Organic silicone heat-resistant primer (800℃）
2*40µm (dry film thickness)
Organic silicone haet-resistant topcoat （800℃）
2*30µm (dry film thickness)
SAFETY AND HEALTH
Please refer to MSDS before using this product. If you do not fully understand the restrictions, or cannot follow MSDS directions strictly, do not use this product. This volatile product is flammable. Keep this product away from flame or fire. Smoking is strictly prohibited in working area. Keep working area ventilated during application to make sure solvent vapor content is low in the air. PPE is necessary to avoid this product contacting with eyes or skin. More detailed safety tips are based on practical situation.
Please handle used paint barrel correctly to avoid any pollution.
Storage:
Store this product in shady, dry, and ventilated warehouse away from fire and heat. The shelf life is 12 months at room temperature.
Disclaimer:
All technical data given in this document is based on our knowledge achieved in lab and practice, so it is not completely correct. Although we try to keep the validity of our advice, we cannot predict the practical conditions that will affect paint quality. Herein, we cannot be responsible for the consequences of variations in such conditions, or for unforeseen conditions. We reserve the right to modify this document without informing in advance.
Packaging | Packing size | Packing weight |
| Part A(iron barrel) | 20L | 30KG |
Part B(plastic barrel) | 4L | 3KG |