Interior Wall Latex Paint Designed For The Substrate Surface Concrete...

这里可以自定义设置

PRODUCT DESCRIPTION

The product is composed of acrylic copolymer emulsion, high quality pigment and a variety of additives. Meanwhile, it has excellent resistance to alkali, water, washing and mildew. Besides, this coating has the advantages of strong adhesion, simple construction, quick drying, non-toxicity and safety.

Typical Uses:

The product is designed for the substrate surface such as the concrete, cement mortar and plaster. Besides, it is also suitable for the interior wall decoration of civil residential and public buildings.

这里可以自定义设置

PRODUCT SELLING POINT

● Nanotechnology, compact structure.

● The coating structure is designed independently.

● Import of 80% raw materials.

● Qualified for export of hazardous chemicals.

● Performance and color optimization customization.

PRODUCT ADVANTAGES

Provide construction plan and construction service

Performance and color optimization customization

The contract is guaranteed for 20 years

Qualified for export of hazardous chemicals

这里可以自定义设置

PRODUCT APPLICATION GUIDE

Mixing	Ready to use
Thinner	Clean water
Airless spray	Nozzle tip：0.017~0.023 inch Spray pressure：15~18 MPa Thinner ratio：0~10% (by weight of paint)
Brush、Roller	Recommended Must achieve required thickness

MORE SPECIFIC COLORS PLEASE CONSULT US

DRYING SCHEDULE

Substrate Temperature	10 ℃	20 ℃	30 ℃
To touch(40um)	4h	2h	1.5h
To handle(40um)	24h	24h	20h
Min. recoating time	24h	24h	20h
Max. recoating time	-	-	-

* Make sure no chalking and other contaminations before recoating.

* Above data for reference only, actual drying time and recoating time is dependent on temperature, dry film thickness, ventilation conditions.

PRODUCT SPECIFICATIONS

Color	Customized
Gloss	Flat
Density	~1.2Kg/L
Solid Volume	(35±2 )%
Film thickness	80µm dry film thickness (about 229µm wet film thickness)
Theoretical spreading rate	3.65 m²/Kg(80µm dry film thickness)
Adhesion	Level 1

这里可以自定义设置

Substrate temperature shall be 3 ℃ higher than dew point, relative humidity less than 85%. Measurement of temperature and humidity should be close to the substrate.