Preferred water - based inorganic zinc - rich primer for initial protection of steel

Steel after forming, that is, facing a variety of corrosion, if not protected, will soon rust corrosion, can not be used for production, at this time, we need to take measures to protect, both economic and affordable method is to use water-based inorganic zinc rich primer.

Steel in the process of storage to use, often after a long period of time, if not protected, not only can make the steel rust, also can reduce the service life of steel, but because of the traveler, companies are often reluctant to invest to protect, water-borne inorganic zinc-rich primer, actually does not need too much investment, rather than dealing with rusty steel, the cost would be lower.Jianbang water-based inorganic zinc-rich primer, zinc content can reach 60~80%, in the initial protection of steel, as long as the spraying of 20~40μm can be about, the cost is about 1 yuan/square meter, not only reduce the investment, but also reduce the steel sand blasting and other processing process.

Solid state, waterborne inorganic zinc-rich primer is a thick coating of anticorrosion primer, due to their high film thickness, can reach more than 200 microns, and paint anticorrosion time greatly extended, not only can be a short-term saving steel corrosion, also can be used as long-term anti-corrosion primer, steel for enterprises who have the consciousness of environmental protection, water-borne inorganic zinc-rich primer more greatly reduce the emissions of pollutants, anticorrosive coatings is a kind of healthy environmental protection