Oriented by technology, we serve customers worldwide not only our high quality products, but also technical consultation and engineering scenarios.
Mixing | Add the curing agent into the main paint and then use the power mixer to mix it evenly. |
Thinner | Special thinner for sealing primer |
Mixing ratio | Part A: Part B = 18:9 |
Airless spray | Nozzle tip: 0.017~0.023 inches Spray pressure: 15~18Mpa Thinner ratio: 0~10% (by weight of paint) |
Brush, Roller | Recommended Must achieve required thickness. |
Substrate Temperature | 10 ℃ | 20 ℃ | 30 ℃ |
To touch(20um) | 8h | 4h | 3h |
To handle(20um) | 4h | 24h | 20h |
Min. recoating time | 8h | 4h | 3h |
Max. recoating time | - | - | - |
Pot life | 4h | 2h | 1h |
* Make sure no chalking and other contaminations before recoating.
* Above data for reference only, actual drying time and recoating time is dependent on temperature, dry film thickness, ventilation conditions, humidity, mechanical strength, etc.
Color | Transparent |
Gloss | Glossy |
Density | ~0.95Kg/L |
Solid Volume | (25±2 )% |
Standard Film thickness | 20um dry film thickness (about 80um wet film thickness) |
Theoretical spreading rate | 13.1m²/Kg (20um dry film thickness) |
Full cure | (23±2℃ )7d |
Copyright © 2020 Changzhou IMS New Materials Technology Co., Ltd. | All Rights Reserved | XML
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.