Superior Quality Epoxy Anti-corrosive Finish Paint
PRODUCT DESCRIPTION
Typical Uses:
PRODUCT SELLING POINT
● With good physical properties of strong adhesion, flexibility, wear and impact resistance
● Salt spray corrosion resistance ≥3000h,Resistance to aging≥5000h.
● 98% concentrated sulfuric acid for 1200h.
● Resistance to 30% hydrochloric acid for 1200h.
● Endure alkali, water, oil and chemical destruction
PRODUCT ADVANTAGES
PRODUCT APPLICATION GUIDE
| Mixing | Use the power mixer to mix the main paint evenly, and then as you stir it, you add the hardener until you get to mix well. Generally, if the temperature is below 10℃, it needs 30 min induction time; If the temperature is over 10℃, it needs 15 min induction time. |
| Thinner | Epoxy paint thinner |
| Mixing ratio | Part A: Part B = 20 : 5 (by weight) |
Airless spray | Nozzle tip: 0.021~0.025inches Spray pressure: 15~18Mpa Thinner ratio:0~15% (by weight of paint) |
Brush, Roller | Recommended Must achieve required thickness. |
MORE SPECIFIC COLORS PLEASE CONSULT US
DRYING SCHEDULE
| Substrate Temperature | 10 ℃ | 20 ℃ | 30 ℃ |
To touch(30um) | 4h | 2h | 1h |
To handle(30um) | 24h | 12h | 6h |
| Min. recoating time | 24h | 24h | 12h |
| Max. recoating time | - | - | - |
| Pot life | 6h | 4h | 2h |
* Make sure no chalking and other contaminations before recoating.
* Above data for reference only, actual drying time and recoating time is dependent on temperature, dry film thickness, ventilation conditions, humidity, mechanical strength, etc.
PRODUCT SPECIFICATIONS
Color | Customized |
Gloss | glossy |
Density | ~1.25Kg/L(after mixing) |
| Hardness | Epoxy paint curing agent |
| Solid Volume | (48±2 )% |
Standard Film thickness | 80um dry film thickness (about 160um wet film thickness) |
Theoretical spreading rate | 5m²/Kg (60um dry film thickness) |
Full cure | (23℃±2 )7d |
| Flash point | 27℃ |
PRODUCT APPLICATION
Substrate temperature shall be at 3 ℃ higher than dew point, relative humidity less than 85%. Measurement of temperature and humidity should be close to substrate.
TEST REPORT
Certificate
CUSTOMER EVALUATION
SHOW CASE
- 01
Dong Ying Olympics Sports Center
Products: Epoxy Sealing Agent + Epoxy Slurry Intermediate Layer+ Epoxy Self-leveling Floor Finish
———————————————————————————————————————————————————————————————————————————————————————————————————————————————————————
- 02
PT.Conch North Sulawesi Cement
Products: Epoxy Sealing Agent + Epoxy Slurry Intermediate Layer+ Epoxy Self-leveling Floor Finish
———————————————————————————————————————————————————————————————————————————————————————————————————————————————————————
03
PT Sgmw Motors Indonesia-lingyun Workshop
Product: Self-leveling Epoxy Floor Paint