Top Quality W61-200 Silicone Heat Resistant Paint Factory
PRODUCT DESCRIPTION
PRODUCT SELLING POINT
● Repair rate 0, no downtime cost.
● The coating structure is designed independently.
● Performance and color optimization customization.
● Provide construction plan and construction service.
.
● The contract is guaranteed for 20 years.
PRODUCT ADVANTAGES
PRODUCT APPLICATION GUIDE
| Mixing | Use the power mixer to mix the main paint evenly, and then as you stir it, you add the hardener until you to mix the paint well. |
Mixing Ratio | Part A: Part B= 20:2 (by weight) |
| Thinner | Exclusive thinner for Inorganic Heat-resistant Paint |
| Airless spray | Nozzle tip：0.017~0.023inch Spray pressure：15~18MPa Thinner ratio：5~15% (by weight of paint) |
Brush、Roller | Recommended for small areas only. Must achieve required thickness. |
| Roller coater | Not recommended. |
MORE SPECIFIC COLORS PLEASE CONSULT US
DRYING SCHEDULE
| Substrate Temperature | 10 ℃ | 20 ℃ | 30 ℃ |
To touch(25um) | 2h | 1h | 30min |
To handle(25um) | 8h | 4h | 3h |
Min. recoating time | 8h | 4h | 3h |
Max. recoating time | - | - | - |
| Use time after mixing | 4h | 2h | 1h |
* Make sure no chalking and other contaminations before recoating.
* Above data for reference only, actual drying time and recoating time is dependent on temperature, dry film thickness, ventilation conditions,humidity, mechanical strength, etc.
PRODUCT SPECIFICATIONS
Color | Customized |
Gloss | Glossy |
Density | -1.25Kg/L |
| Hardeness | Curing agent heat-resistant paint |
| Solid Volume | (45±2 )% |
| Standard Film thickness | 50µm dry film thickness (about 111µm wet film thickness) |
| Theoretical spreading rate | 7.2m²/Kg(80µm dry film thickness) |
| Full cure | (23±2℃) 24h |
| Flash point | 27℃ |
PRODUCT APPLICATION
Substrate temperature shall be 3 ℃ higher than dew point with relative humidity below 85%. Measurement of temperature and humidity should be conducted close to substrate.
TEST REPORT
Certificate
CUSTOMER EVALUATION
SHOW CASE
- 01
Dong Ying Olympics Sports Center
Products: Epoxy Sealing Agent + Epoxy Slurry Intermediate Layer+ Epoxy Self-leveling Floor Finish
———————————————————————————————————————————————————————————————————————————————————————————————————————————————————————
- 02
PT.Conch North Sulawesi Cement
Products: Epoxy Sealing Agent + Epoxy Slurry Intermediate Layer+ Epoxy Self-leveling Floor Finish
———————————————————————————————————————————————————————————————————————————————————————————————————————————————————————
03
PT Sgmw Motors Indonesia-lingyun Workshop
Product: Self-leveling Epoxy Floor Paint