Quality JB-AEP101 YMS Alkyd Resin paint Oem From China-YMS Paint
PRODUCT DESCRIPTION
This product is an anti rust paint composed of modified alkyd resin.Meanwhile,this coating contains no lead,non-toxic,good adhesion.Besides,it also combines the excellent rust resistance and water proof resistance.
Typical Uses:
This product can be applied as primer for steel structure above waterline and on land.
Application Guide
● Mixing:
Ready to use
● Thinner:
Alkyd thinner.
● Airless Spray:
Nozzle tip: 0.017~0.023 inches.
Spray pressure: 15~18 MPa.
Thinner ratio: 5~15% (by weight of paint).
● Brush, Roller:
Must achieve required thickness.
DRYING SCHEDULE
Substrate temperature | 10 °C | 20 °C | 30 °C |
To touch (40μm) | 5h | 1h | 30min |
To handle (40μm) | 48h | 24h | 12h |
Min. recoating time | 36h | 24h | 12h |
* Make sure no chalking and other contaminations before recoating. | |||
* Above data for reference only, actual drying time and recoating time is dependent on temperature, dry film thickness, ventilation condition. | |||
SURFACE TREATMENT
All surfaces to becoated shall be clean and dry.The surface shall be evaluated and treated according to ISO8504 standard.Steel:Sanding to Sa2.5(ISO8501-1:2007).It is acceptable to polish by power tools to meet at least St2.0(ISO8501-1:2007).Steel coated with workshop primer:make sure workshop primer surface is clean,dry and undamaged.Coated surface:applied on clean,dry and undamaged primer only.
APPLICATION
Application conditions: Substrate temperature shall be at 3℃ higher than dew point, relative humidity less than 85%. Measurement of temperature and humidity should be close to substrate.
CLASSICAL COATING SYSTEM
Please inquiry JIANBANG Paint for specific coating solutions.
Alkyd Iron Red Anti-rust Paint: 2*40µm (dry film thickness)
Alkyd Mica Ferric Oxide Paint: 2*40µm (dry film thickness)
Alkyd Enamel: 2*35um (dry film thickness)
SAFETY AND HEALTH
Please refer to MSDS before using this product. If you do not fully understand the restrictions, or cannot follow MSDS directions strictly, do not use this product. This volatile product is flammable. Keep this product away from flame or fire. Smoking is strictly prohibited in working area. Keep working area ventilated during application to make sure solvent vapor content is low in the air. PPE is necessary to avoid this product contacting with eyes or skin. More detailed safety tips are based on practical situation.
Please handle used paint barrel correctly to avoid any pollution.
Storage:
Store this product in shady, dry, and ventilated warehouse. The shelf life is 12 months at room temperature. If exceeding shelf life, the products shall be tested before using.
Disclaimer:
All technical data given in this document is based on our knowledge achieved in lab and practice, it is not completely correct. Although we try to keep the validity of our advice, however we cannot predict the practical conditions that will affect paint quality. Herein, we cannot be responsible for the consequences of variations in such conditions, or for unforeseen conditions. We reserve the right to modify this document without informing in advance.
Packaging | Packing size | Packing weight |
| 20L | 25 KG |
Certificate