Solvent-based High Elastic Chromatic Exterior Wall Paint

这里可以自定义设置

PRODUCT DESCRIPTION

This product is a two-component coating composed of high elastic special rubber, modified resin, high quality pigment and filler, auxiliary agent, cross-linking agent etc. Meanwhile, by solvent volatilization this product can form a continuous, rich elastic, tough and durable protective film. Besides, the coating film has excellent physical and mechanical properties, heat resistance, cold resistance, etc. Furthermore, it can keep its elasticity for a long time when the temperature is between 25℃ and 80℃.

Typical Uses:

This product can be used for the surface of cement mortar, concrete, asbestos cement board, etc. Besides, it is especially designed for the maintenance and protection of internal and external walls with cracks.

Advanced Glossy Outdoor Pure Acrylic Latex Paint

这里可以自定义设置

PRODUCT SELLING POINT

● Nanotechnology, compact structure.

● The coating structure is designed independently.

● Import of 80% raw materials.

● Qualified for export of hazardous chemicals.

● Performance and color optimization customization.

PRODUCT ADVANTAGES

Provide construction plan and construction service

Performance and color optimization customization

The contract is guaranteed for 20 years

Qualified for export of hazardous chemicals

这里可以自定义设置

PRODUCT APPLICATION GUIDE

Mixing	Use the power mixer to mix the main paint evenly, and then as you stir it, you add the hardener until you get to mix well.
Mixing Ratio	Part A: Part B= 5:1 (by weight)
Thinner	Elastic exterior wall coating special thinner
Airless spray	Nozzle tip：0.017~0.023 inch Spray pressure：15~18 MPa Thinner ratio：0~15% (by weight of paint)
Brush、Roller	Recommended Must achieve required thickness

MORE SPECIFIC COLORS PLEASE CONSULT US

DRYING SCHEDULE

Substrate Temperature	10 ℃	20 ℃	30 ℃
To touch(30um)	2h	0.5h	20min
To handle(30um)	24h	24h	18h
Min. recoating time	2h	0.5h	20min
Max. recoating time	-	-	-
Pot life	4h	2h	1h

* Make sure no chalking and other contaminations before recoating.

* Above data for reference only, actual drying time and recoating time is dependent on temperature, dry film thickness, ventilation conditions,humidity, mechanical strength, etc.

PRODUCT SPECIFICATIONS

Color	Customized
Gloss	Glossy
Density	-1.1Kg/L
Hardener	Special curing agent
Solid Volume	(40±2 )%
Standard Film thickness	60µm dry film thickness (about 150µm wet film thickness)
Theoretical spreading rate	6.06m²/Kg(60µm dry film thickness)
Full cure	(23±2℃) 7d
Flash point	31℃

这里可以自定义设置

PRODUCT APPLICATION

Substrate temperature shall be at 3 ℃ higher than dew point, relative humidity less than 85%. Measurement of temperature and humidity should be close to substrate.