Top Quality Advanced Elastic Outdoor Latex Paint Waterborne...

这里可以自定义设置

PRODUCT DESCRIPTION

This product is a kind of environmental friendly waterborne paint, which is composed of elastic acrylic copolymer compound with UV cross-linking and solidity function, high-quality pigments, fillers, and various additives. This durable and washable coating can keep its elasticity in the temperature range of - 20 ℃ ~ + 40 ℃ for a long time, so as to cover the wall cracking and make the coating protected and anti-leakage. What’s more, with its cross-linking and solidity, the coating has special performance in resisting contaminants, water, acid rain, muggy, and it will ensure the neatness and cleanness of the wall.

Typical Uses:

This product can be applied on concrete, cement mortar, plaster and other substrate. In addition, it is mainly designed for the decoration of interior and exterior walls as well as the special finish coating for composite embossed latex paint.

Advanced Glossy Outdoor Pure Acrylic Latex Paint

这里可以自定义设置

PRODUCT SELLING POINT

● Nanotechnology, compact structure.

● The coating structure is designed independently.

● Import of 80% raw materials.

● Qualified for export of hazardous chemicals.

● Performance and color optimization customization.

PRODUCT ADVANTAGES

Provide construction plan and construction service

Performance and color optimization customization

The contract is guaranteed for 20 years

Qualified for export of hazardous chemicals

这里可以自定义设置

PRODUCT APPLICATION GUIDE

Mixing	Ready to use
Thinner	Clean water
Airless spray	Nozzle tip：0.017~0.023 inch Spray pressure：15~18 MPa Thinner ratio：0~10% (by weight of paint)
Brush、Roller	Recommended Must achieve required thickness

MORE SPECIFIC COLORS PLEASE CONSULT US

DRYING SCHEDULE

Substrate Temperature	10 ℃	20 ℃	30 ℃
To touch(30um)	4h	1h	40min
To handle(30um)	24h	24h	20h
Min. recoating time	24h	1h	40min
Max. recoating time	-	-	-

* Make sure no chalking and other contaminations before recoating.

* Above data for reference only, actual drying time and recoating time is dependent on temperature, dry film thickness, ventilation conditions,humidity, mechanical strength, etc.

PRODUCT SPECIFICATIONS

Color	Customized
Gloss	Flat
Density	-1.24Kg/L
Solid Volume	(42±2 )%
Standard Film thickness	60µm dry film thickness (about 143µm wet film thickness)
Theoretical spreading rate	5.64m²/Kg(60µm dry film thickness)
Full cure	(23±2℃) 7d

这里可以自定义设置

PRODUCT APPLICATION

Substrate temperature shall be 3 ℃ higher than dew point with relative humidity below 85%. Measurement of temperature and humidity should be conducted close to substrate.